mathews_hunter

Im having issues with my 2019 Yamaha F25LA kicker. It was running fine and all of the sudden one day it started having issues keeping RPM under load. I thought it was water in the fuel but have since ruled that out. Plumbed off the same tank as my main motor that runs fine. I have replaced fuel filter and fuel pump and it has not improved. My next idea is to put a new carb on it. I had my boat out of the water for 3 weeks for the local mechanic to rebuild the carb and he never got it it. Just wondering if anyone knows of these motors to have CDI issues that could cause them to run poor? Or should I continue to trouble shoot the fuel system.

It’s an inboard. I have gone from a 3 blade to a 4 blade 18” Acme prop.

I have a Baha 277 gle that has a 350 MPI 300 hp rated in it. It’s under powered for the boat. I was curious to get some opinions for repowering the boat. It seems like the cost of repowering newer fuel injection boat is much greater than carb motors. Is there any shops that any specialize in newer fuel injected motor packages?

I’m looking to find someone to apply interlux2000 to my boat. Boat is in the Henderson area. Was hoping to have it done on my trailer and just paint the areas of the bunk at the ends of the season.

Hi everyone. I have had a 277gle for about a year now. It has a 350 MPI inboard in it. I have to run 4000 rpm to get the boat going 20mph on a calm flat day. It has an 18rx17 prop on it. Does anyone have any suggestions on if I should re prop the boat or know of a good place to talk to about props? I would like to lower my cruising rpm’s and maintain 20mph around 3600 rpm if that’s possible.

The commander is great if you only fish smooth days. I owned a 2050 handled big water but I thought ride was sub par. I felt it was rough riding even with a smooth moves seat.

Take a ride in 2 footers before you drop any cash down.

I’m looking to upgrade my electronics on my boat over winter. It has an older ray marine C80 that I use for sonar and an older lowrance 7” unit that’s used for mapping. I troll both shallow for walleye and Deep for trout. I’m looking to possibly get 7” unit for running depth charts on that will be mounted in my hard top and then mounting a larger unit on the helm. Does anyone have any recommendations of units that network together easily? I’m also looking for something that’s capable of adding radar to also if I decide to do so. Thanks.

Henderson Harbor area. I’m willing to ship the rods for repair.

Any recommendations on a good rod repair person?

I have a few Tolora rods that got knocked around by the kiddos on the boat this year. They lost the ceramic inserts on the last eyelet. Short of cutting end of rod off what’s my options for repair? Are there any guys that do rod repair?

TTT