Jump to content

gotaway

Members
  • Posts

    90
  • Joined

  • Last visited

Posts posted by gotaway

  1. looking at the picture..... the flat metal plate mounts to the front of the motor.  (I mounted it to the carry handle)...the plate has a ball where the ram attaches with a quick connect........ the other end of the ram has a ss stem that mounts to the clear lexan mount...to remove the ram, disconnect at the motor using quick connect....lift the stem from the mount.....unscrerw the power lead

  2. https://www.manualslib.com/manual/313947/Raymarine-Autohelm-2000.html              Raymarine Autohelm 2000...linear autopilot with wired remote....This is configured for use with a auxillary trolling motor...includes mounting bracket to kicker,  quick disconnect and storage bag

     

    Control unit mounts at the helm,    has standby and auto function....   able to override and control kicker by  One degree or Ten degrees Port or Starboard with push of button

     

    Wired remote has the same function as the helm unit but allows for course correction at the back of the boat

     

    I used this on my 19 Starcraft Islander with a 9.9 Yamaha....no longer have the boat so I'm selling....works perfectly, I can demo all functions..I live in Scotia, NY (capital district)...

     

                                       .................................  $ 250 .............................

     

     

    20160520_131224_resized.jpg

  3. I have 2 copper rigs to sell, got a smaller boat, cutting back on what I carry

     

      * Okuma convector CV 55 S  , 6.2:1 gear ratio, power handle , loaded with 400'  45# copper,  300 yds power pro backing

     

      * Okuma convector CN 55 S  , 6.2:1 gear ratio, power handle , loaded with 300'  45# copper,  250 yds  25# mono backing

     

      * EACH REEL IS MOUNTED ON A ,  7' custom rod ;  Eglass rod blank, Fugi reel seat w/ cushioned hoods, high density Hypalon grips, indexed butt plate, 11 stainless steel guides  ...black on black....  Med soft tip , plenty of backbone for leverage

     

                                          $150 each combo..........  the reels are fresh, no chips or scuffs on rods or reels

     

     I also have an Okuma convector CV 55 W  with power handle, this is a large capacity reel ( 660 yds / 30#), I had 500' 45# copper and 300 yds PP on it with room left........... I sent this reel to Tuna Tom, had a tournament drag put in and had the gear ratio increased to 6.2:1  (it was 4.0:1).....there is no line on this reel but I'll include a rod ( I think it's a 8' spiral wrap)............. $90

     

    I'll send pix if requested......I'm in the Schenectady area but I get to Utica occaisonally

      I'm going to the ELOSTA TACKLE SWAP this SAT. (14th), I can bring them if you want to check em out

     

                                              Joe   518 428 0547

  4.                   Holds 5  rods  verticle on top   +   1 angled to the rear (adjustable)  

                                                +   2  side holders(adjustable)

                                                        total of  8  positions

                 

     

     

                                        made of  1  1/2"  Stainless steel tubing

     

                              Strong and solid enough to hang onto on rough days

     

     

     

      It is designed to use in 90 degree (vertical) recessed rod holders(easy to remove for storage), I used hvy duty Smith holders, they're   available if you need them, or add a plate to each leg

     

      note the corners can be disassembled for easy transport, also allowing an easy way to make the legs narrower

     

     

     

                                                  

     

                                                  located in Schenectady, NY.....

     

                                                           $450

     

                                             call  Joe  @  518 428 0547

     

     

                                            post-140140-0-96601600-1375113012_thumb.jpgpost-140140-0-36199500-1375113109_thumb.jpgpost-140140-0-82751800-1375113204_thumb.jpgpost-140140-0-62633600-1375113265_thumb.jpg ,,,,,

  5. 2 Scotty riggers with 4' SS booms, swivel bases and mounting plates,   Blacks releases and weights, complete with wiring harness and circuit breakers

     

     ............$ 600  .....................................................................

     

     

    ...    Joe   .........   518  428  0547   .............................

     

     

     located in the Albany area

     

     I'll be out of town 5/18   -    5/26   but riggers will be available

  6. 1986 Starcraft Islander 191

              4 cyl  120hp  I/O

              2 Battery electric system

              Soft top, side curtains and back cover

              14 place, hanging rod storage in cabin

              Tackle storage locker

              11 Rod holders

               Auxillary motor bracket

               Cooler platform

               Marine stereo

               Net,  Anchor

        Shorelander roller trailer w/ new tires

    ............................................................................ $3,600

     

     

                               OR

     

             Fully  Rigged   including;

     

              Yamaha 9.9hp high thrust  4 stroke  w/ controlls @ the helm

              Raymarine Autohelm 2000 autopilot

              Raymarine DS600X Color sonar

              Raymarine RC435 Color chartplotter w/ Navonics east region chip..+ Fish'n chip

              Depth Raider..speed and temp @ the ball

              Standard Horizon VHF w/ new Shakespaere 8500 antenae

              2   Scotty  Electric Downriggers..4' arms..w/ swivel bases, weights and releases

              Stainless Steel Arch w/  6 top  +  2 side  rod holders

              2  Removeable "T" style triple rod holders

              2  Otter Boats  w/ bow mast  and Willie retrieval reels

     

      .........................................................................$7,500

     

     

     

     

             " or anything in between "

     

     

    Boat has no leaks or damage..looks good for it's age..........Motors run smooth with no issues........Had the Outdrive off end of last year, inspected and serviced.......... New floors end of last year..........

     

    I'll sell her as the  "Boat Package"   ,   the  "Rigged Package"   ,   or minus/plus what you want

     

     Already had a thee day trip to Oswego on her this year ... This boat is laid out realy well and really catchs fish.....She's ready to put in the water right now.....located in   Schenectady, N.Y

     

     

                                                                           Joe   518- 428 0547

     

     

     I'll post more recent pix showing the arch ASAP

    post-140140-0-97255000-1367775927_thumb.jpg

    post-140140-0-40020000-1367775966_thumb.jpg

    post-140140-0-77343200-1367775994_thumb.jpg

  7. located in Dowie Dale Campground and Marina...located between Catfish creek and the State boat launch...close to Salmon River and Grindstone Creek

    Site trailer with large addition and metal peaked roof..large deck incuding screen house

    in quiet wooded area

    2 bedrooms / 4 bunks

    Kitchen with full size fridge

    Living area with 2 recliners, table and chairs, cable TV

    Full Bath with shower.... 20 gal. water heater

    Propane heat....air conditioned

    Quiet wooded area

    On grounds marina with dockage available

    $830 annual site rental fee

    very good condition.. $5000....call Joe at 518 428 0547

  8. G

    I put the Torpedo roller tips on my Dipsey rods last year. They swivel about 270 degrees and have a built in guide to keep the wire in the center of the roller. Very well made...... If you install them, make sure before you glue them in place you position them so they swivel to each side evenly

    You can try GENTLY applying heat from a candle to loosen the glue on the existing tip, if that dosen't work, or if you "melt" the blank inside the old tip, cut off the old tip with a fine blade hacksaw, roughen the area where the new tip will go and epoxy the new ones on

  9. d

    Are the Accu Depth reels the newer AD+ ? If they are, and you like them, you could;

    Put 1000' of 30# wire on 2 of the 47's for dipsey use

    Put a short section of leadcore on each of the other AD47's ( EG; 2, 4 color ). Use a braid like 50# Power Pro as backer. These can be good off boards for browns and steelies.(Tie in 50' of mono between the core and the braid to clip the release on)

    Buy two AD+ 57's, Load them close to full with 20-25# mono. use these on your riggers, when the fleas show up strip off 300' and use a blood knot to fill it with 30# mono

    Buy two AD+ 27's , load them with 15# mono/ leader down for boards, flat lines or clean spoons of your riggers.

    use what rods you have and fill in what you don't

    I bought a bunch of the Accu Depth + reels 4-5 years ago planning to upgrade when I could afford to. I'm still using all but one, they work for me

    I second the advise to attend the seminar at Gander,

    Joe

  10. This will be year #3 using the same 200# Mono on my planer reels... when I think about it I spray it with Blakely "Reel Magic" (or WD40)...the releases run out smoothly....I use Otterboats with double keels...I like the slight amount of stretch

    I was warned that the mono can "tighten" on itself under the load and crack the spool.... because of this I wound on some old Dacron I had from icefishing( about 1/2" thick) before I loaded the mono........ ("knock on wood") I haven't had any problems

    I know another guy who has 5 yrs on his mono line...still no problems

    Joe

×
×
  • Create New...