Jump to content

Chromemagnum

Members
  • Posts

    67
  • Joined

  • Last visited

Posts posted by Chromemagnum

  1. If your boat is aluminum put aluminum floors in it. I removed my marine plywood and replaced with aluminum . Strong, won’t rot, light , super durable. I then put aqua traction on it 

  2. 85051EC7-1AE6-486B-BD9F-7FEAE9103825.jp21998 Fountain Center Console SportFish 29' , Boat has been in fresh water most of its life in the Great Lakes. Twin Mercury out boards 225hp, port engine has 287 hours, starboard engine has 279 hours ( hours differ from running one at a time trolling) Engines are Mercury Salt water addition which have heavy duty stainless parts in them, both engines have quick connect flush outs ,stainless propellers. Boat is equipped with wash down hose, live well, 12" Garmin screen, through hall depth sounder and fish finder, Vhf ship radio, stereo, blue led courteous lights,Led stern work lights, navigation lights in the bow and stern, Joy stick spot light, Outriggers for trolling, Digital compass , back up Garmin GPS with twin GPS pucks,Trim tabs, Flo scan fuel gauges for each engine, water and fuel separators, twin bilge pumps.Ship to shore power. T-top and rod holders all powder coat paint. Complete note book with accessories and service manuals and receipts. Boat has a like new full boat canvas, canvas just for center console, canvas covers for both engines, canvas are black in color, The T- top has a green top and also a never used black T- top. The fountain is very nimble and has no problem taking several mile trips in rough water.  Boat comes with a custom three axle trailer 45,000.00Fountain 2.jp2 Fountain 1.jp2Fountain 3.jp2Fountain 4.jp2Fountain 5.jp2Fountain 6.jp2Fountain 8.jp2Fountain 10.jp2Fountain 11.jp2Fountain 17.jp2Fountain 19.jp2

  3. I have a pair of cannon riggers I would like to wire up, the current connections are a male female plug that came wired to the riggers, my question is .... Will the flush mount wireing acessorie from cannon take the male and female connection from the rigger, I assume it will? But in the pictures of the flush mount connection the yellow receptor looks like it takes two males not one of each?

    Or do I Just cut the conectors off wire in a inline fuse and connect directly of battery?

  4. Poke , just finished them the pin is a friction fit ... I got that out the bolt was tuff but I screwed a nut on it and hit it out with a ball peen hammer they are not threaded, they just are friction fit they will not turn the only wAy out is to knock them out . I need a few more holders if you know anyone who has any

    [ Post made via iPhone ] iPhone.png

  5. I have big job rod holders ( the ones that you pull the spring loaded pin to adjust ) I need to separate the wheel with the holes in it from the aluminum base to get access to the bolt that comes through the bottom of the base... I need to remove it and put longer bolts through the base? The pin that holds it together looks like a friction fit pin( like they uses to hold guns together) just wanted to know if anyone else has had one apart before I start beating on it with a center punch?

    Thanks in advance!

    [ Post made via iPhone ] iPhone.png

×
×
  • Create New...