jakebrown

Have a 6ft dual reel mast with a Springfield plug in base which could be cut off and replaced with a mounting plate. Used 1 time. $250. They go for $500. Sent from my VS988 using Lake Ontario United mobile app

Its a simple job you just need a 3 point puller Sent from my VS988 using Lake Ontario United mobile app

I had the same thing with my tohatsu. I replaced the timing belt and it took care of it.

Planer mast and boards Great lakes 6ft double planer mast with springfield 2 3/8 dia. plug in base and 2 Aurora lights regular size boards both used 1 time only. Plus about 50 brand new releases. $475.00 firm. Prefer not to separate. Local pick up only .Fish out of Oswego and Mexico could deliver. If the plug in mast wouldn't work it could be cut off and a plate welded to it. Located in fulton NY.

I have a 6ft great lakes planer mast with aurora lights boards used only 1 time. The mast has a pedestal mount. plus about 50 releases. Have over 1000. into it asking 500.

I have a 6ft great lakes mast 2 yrs old used once with aurora lights planer boards and about 50 releases. But it all has to go together. Want $500.

Have a 2013 9.8hp with 330 hrs on it used only for trolling. Its never had a whine to it. Its a very quiet motor. Had to replace the timing belt at 290 hrs other than that its been great.

Medium light 8 ft okuma cold water. You feel the fight.

I have been running 13 pnd torpedo weights for 3 yrs with no problem.

I have a 1987 19.5ft fish and ski andit holds 24 gallons.

I was just on the WD40 website and they say it does not contain fish oil and they recomend not using it as an attractant. Just passing along what they said.

Caught 10 eyes this morning south of bouy 125 in 15-20 fow useing bottom bouncers and purple jigs. Did good yesterday south of bouy 127 in 30 fow.

Fished with trackerhunter this morning. We fished 175-200 fow caught 9 off the boards and the other 3 on the riggers 25 down. All were caught on blue dolphins and green dolphins. East west troll . straight out in front off the high sand cliff to the east of the fairhaven outlet. Awsome morning just kept going back and forth over our marks.

Yes i have the same problem.

Its worth more to me parted out. To sell it whole i would like $750.

I have a 1986 evinrude 88 spl that has somethng going on inside. The motor still runs good but something bent the spark plug electrode. Im looking to part it out. It had a new crank and rods put in it last yr. I went through the lower unit and replaced everything related to the water pump and impeller this spring. The power tilt and trim unit has no problems it works good.

I have a new 13 1/4 17 pitch quick silver prop part number QA3036R asking $80. Its a13 spline for an evinrude 45-140 hp