Forgot your password?
in Musky, Tiger Musky & Pike (ESOX)
Posted October 28, 2019
Decent!!! That is a beauty!!
in Classifieds - Buy, Sell, Trade or Rent
Posted August 29, 2018
I will take 1 send me your info
in Finger Lakes Discussion
Posted September 26, 2016
Last week on the north end I brought
the ball up and had 3 lampreys on it !!
And they were like you described, 15"-18"
and a grayish color.
Posted July 22, 2016
I wondered where you were fishing.
The fleas on the north end are terrible.
Posted September 27, 2015
Way to go Paul,you have worked hard all year.
Posted June 21, 2015
I'm glad that you have figgered them out! I have gone 4 trips without
A fish!! If I had any athletic ability I would take up golf!!!
Happy Fathers Day
Very tough fishing . This morning was the fourth trip in row without a fish!!
Did hook three saw bellies on single hook spoons so there is plenty for the fish
Posted October 2, 2014
You can Google the Hobart college research buoy which is located off
Clark's point, at the north end. It has wind speed,direction.Water
Temperature top to bottom.For me if it's 12mph out of the south I
Wait for another day. But I'm retired.
Posted September 6, 2014
I was fishing the north end. We marked a lot of fish but they were mostly suspended.
With the south wind blowing like that and the current heading back to Watkins
It is tough fishing. I never have much luck with these conditions. I had looked at
the Hobart bouy site and it was 9mph @ 178 degrees, out on the water we checked again
and it was 12 mph! Ended up with 3 Lakers.
Posted August 12, 2014
Were you fishing out of the PennYan hardtop? I was in the Pursuit with the green top. I had a friend from California
fishing with me and I was explaining what pulling copper was and how effective it is. Was it hard to find bottom
with current? We were trolling east/west and back. Down Riggers with Mt. Dew crush on the bottom got 6 Lakers,
one 10#. A Dipsey out 120 with a 3 setting caught a small rainbow. I told him that Tuesday would be unfishable
with a 20 mph south wind, boy was I right!
in This Old Boat
Posted August 7, 2013
I had the same problem with mine. Brandon at screwy Louies said that the gear case was out of grease.
I'm sure that he would have done this. Make sure that the clutch knob is tight (counter clockwise).
I burned out the second board that I had installed.
Posted July 17, 2013
That is where I would start. Have you been using non ethanol gas ?
Posted July 1, 2013
I found a replacement controller for my autopilot but it's a newer model and the New unit has a
Larger center hub. On a new installation I would use the right hole saw, but I don't know the best
way to enlarge an existing hole. Due to the cabling it has to stay where it is.
in Questions About Trout & Salmon Trolling?
Posted June 16, 2013
There was a big discussion on Otter boat keels , 2 or 11/2 keels or Adam2000 has made replacement
We fished the north end trolling stinger spoons for rainbows, browns, L.L. Trolled 2.0 to 3.5 GPS in 30' to 50'
Lots of bait but a lot of wind out of the south. Caught 3 small lakers and lost 2, one of them a good fish.
Earlier this week l caught rainbows and a brown, but just Lakers today.
Posted June 13, 2013
What type of release do you use on the copper off the planet boards ?
in Tackle and Techniques
Posted June 12, 2013
Has anyone ever had to grease a gear box on a cannon ? What fitting or zero ? What kind of grease?
Posted June 5, 2013
Speed is the factor factor with an autopilot. The wind and waves make it impossible to troll straight
Posted May 29, 2013
Had a couple of guys that were going to check if they had an old one. Any luck ?
Posted May 22, 2013
I need a replacement controller for my ST5000 autopilot. Any thoughts would be appreciated.
Posted May 17, 2013
Did you mean ST5000 ?
Yes I think it is an ST5000, do you have any parts? If you do please give me a phone number.
Posted May 16, 2013
If anyone knows where I can find a controlled or (brain) I would appreciate it.