CatskillBob

sounds just like my setup with the tie bar, a 225 yamaha ox66 & 9.9 kicker connected with a diy tie bar. I went with Lowrance Outboard AP hydraulic and went with the new HDS live unit + bluetooth remote steer. Its a slick setup!. Installation was Easy done in the driveway. Tyee's advice above is spot on about matching your existing electronics if you can.

The AP works with both motors as my setup is always connected. The motors don't need to be running for the AP to work. 

I'd take them if still available. I'll send pm

Text sent - I'll take them. Thx

^ One of those on eBay right now. Thanks, but never hurts to ask as guys are spring cleaning. 

Looking to purchase lightly used ugly stick down rigger rods. Specifically the Older BWD 8'03" light action 2 piece. Let me know if you have anything laying around. Thanks!

Shakespeare Ugly Stik BWD 1101 83 8'3"

Thanks,

Bobby

Looking forward to seeing you on the FLX this summer in the little spoon!

two spherical ball joint ends from Napa with a stud, a piece of 3/8" rod, and a die to cut threads on the rod to match your ball joint ends and some scrap aluminum to make your mounting brackets if necessary. About $25 in material and a few hours for trail and error bending your piece of rod. Heat helps with the bends. A lot lot cheaper than going with sea-star. 

The Lowrance Carbons are on sale right now... Carbon 9 + Total Scan ducer for around your price, around $1,600 +/-

Can easily integrate autopilot at a late date with that unit. 

HOOKED UP CUSTOM BAITS! Ask for Carl! 

https://www.facebook.com/Hookedupcustombaits/?fb_dtsg_ag=AdzjM3qvVqY1LcjE3Oi0FORJ1Wy3YKtSMfOVVL7pO9yVHQ%3AAdwkjrEBcyE48v1bXG5rIYCVDrIDU7JnvRJVrI7dv56goA

Ozzy's Obsession sells them and had a post up last week.

I love them and you cannot beat the price $75 shipped, his coating holds up well and the weights track very nicely even when going DEEEEEP

Sent message for 4, Thx ozzy, I have used these weights in the past, they are great and already coated, run true, only problem with them is they sink really fast when you snag bottom in the Hudson... 

I would check LP fuel pumps for pinholes. Yamaha's are known for failing. They are easily rebuildable for less than 20 bucks per pump for the diaphragms. 

if you figure it out please circle back with your results. Thanks

I am considering selling it yes, or holding onto it for a spare. Still on the fence as it has treated me pretty well and only has around 950 hours on it. 

I put a deposit on a 225 Yamaha with 325 hours on it yesterday so I should decide in the next 2-3 weeks.

Looking for a used but good quality lower hour Yamaha outboard to re power with. 2 or 4 stroke fine. 25" shaft. willing to travel. Needs to be 225-300 hp.

Year 2000 or newer preferred. 

Stinger, Stingray or mag size?

What size? Thanks

My previous offer still stands... 

Thanks Chris and others! Man this site is AWESOME! Thanks for your quick replies. I picked up a set of black Chinooks in size 1, 3, & 5 and might have to try a set of the deeper divers. I like the absence of the ring. From what I read about the Chinooks, though, maybe the others wont actually get a chance.

I like the fact that they are stainless (what boat guru doesn't like stainless??) and made on a smaller scale from a NY local captain.

Cheers and Fish On!

I've never run divers much but like my original post said, but we couldn't keep the mag dipsy in the water last Friday on Cayuga. It took 19/31 fish caught that day. 

Hey LOU Members,

Divers... That's the question. Which type are you all using. I mainly fish smaller lakes, the fingers and an maybe Ontario 1 or 2x a season. I have both wire and braid rods set up. I have had good results with dipsys, but there are a lot of others on the market. Can somone be kind enough to help me decide if I should diversify my diver collection or just stick with the Dipsys. THere are Chinook Divers, Slide Divers, Deeper Divers and I am sure many more... Last weekend the mag dipseys out 125 did really well on hungry lakers on Cayuga.

Also, what about color... I don't think it matters much but looking for more seasoned anglers opinions

Thanks in advance

That's a beauty and seemingly a great buy. Someone is going to end up with a fish slaying machine. GLWS

Look into greenhouse wall side kits, they are made to roll up high and for longer 50+ foot lengths. The pieces that make up a kit may give you an idea

Sent PM

Thanks for the suggestions guys! I had a bottle of the Starbrite Deck Cleaner in the shop so I gave that a whirl. It worked AWESOME and even provides a protective gloss (PTEF) for added UV protection. 

Those who have these riggers, check the adhesive on the stickers (the main one on top of the body) the adhesive cannon used is Junk and deteriorated on all 4 of my riggers allowing water to get into the body and flood the motor. I fixed them up with some fast cure epoxy and re-set them. Good time to go over them and make sure there will be no issues come splashdown time. 

Thanks again!

Would you be able to ship?

Thanks, I have some starbrite deck cleaner and will give that a shot!!