Jump to content

phil2

Members
  • Posts

    335
  • Joined

  • Last visited

Posts posted by phil2

  1. Uni troll 6 questions..

    Have 2 hand crankers one has been hanging up. Dry!! I took the handle off and 3 plates were stuck together. Greese turned into hard white cement. Soaked them for a while got them apart and cleaned up pretty well. Do I greese everything?? Figured middle ceramic  is the breaks. Sprayed some white lithium in the tube for the handle. 

  2. Ofmanyone thank you! Ifishy I'm trying to get rid if the whole thing. As it sits its about 5 ft off the ground at the door the poles that are with it can come up another maybe 6 in. Or you can change out poles with longer galvanized and use as a dock. Think set long ways could be 40 ft long. 

     

     

  3. I'm in your boat lol. I was looking for a walleye boat and sell the bass boat but when you look at demo 621 I'm up in the 50k plus then you have to set it up for salmon, another couple grand. I can get into a loaded lake boat for 10 to 15 k. I would still have have the ranger for bass tournaments, chasing stripers, and Lakers on lake George. Then on good weekends I can run to the big lake.

  4. If you have a sears. I run the platinum 31 series for starting battery. I run 4 graphs, two 4 pump live wells and start a 250hp outboard and have had it in for 5 yrs no problem. Trolling motor you can get a way with a wallmart 29 series. Or interstates a 24 series for starter and 29 for trolling motor.

  5. Ya its a pain with just me and my sister. But I get it done. Netted 26 kings last summer out of it. But sat on the bank quite a few times. They say light and variable and there is 6 ft rollers.

  6. I ran a z520 last year unbolted the back fishing seat ran a 2x6 had two 4ft arm cannons and 3 extra rod holders. Was able to run 2 riggers and two dipsey rods no problem. Ran 2 36" bags to keep me under 2.8 mph flat days ran the 101 with a 5 rods one on a planer board. Had to play the wind could do it up to 3 to 4 ftrs when it was bumpy I ran just 3 dipsys two down the sides one on a 3 setting. Your boat is built for the rough stuff. Go fish.

    8541.jpeg

  7. I noticed last year. One rigger rod clear 30 lb big game. Other 30 lb green. I was catching fish put same flasher and fly same depth on the green, the clear fired nothing on green line?? Thought it was weired. Think all season only had 2 releases on green line rod. So maybe the reason. On my dipsey I run 40 lb power pro right to dipsey. 30 lb clear big game to flasher. Other 40 lb suffix that turned lighter green had only two fish on the faded line. Wouldn't think it would make a difference but it did.

  8. Parts box

    Looking at 4 boats all older. I'm not 100% on not going smaller trailerable 22 to 24 ft or just saying heck with it and get a 26 to 27 ft. Question is What do you keep as a in case **** box?  Hoses, clamps , stuff for on the water fix item's. 

  9. Been watching videos. The guy adds the musky one to a 300 copper then to a walleye board so I shouldn't have a problem. Been looking at plus and minus of copper. Think with the diver I can use rods I have and not have to buy copper sets. I can run my braid and put rods wherever.

  10. Torpedo diver?

    Been looking at the torpedo divers. Can't figure out what to buy.. Main use is on braid on a walleye board and a tx 44. 75 ft and less. Is the cuda to big for the walleye board? Or is the next size down the right one to have? 

×
×
  • Create New...