Buckmaster7600
-
Posts
224 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Buckmaster7600
-
-
My hook up rate went up when I quit using snubbers.
-
I have some R$R super lite mags that the paint fell off and painted them bright orange with green tape on 1 side by far my best lake trout spoons on lake george and lake champlain.
-
Diawa sealine or seagate have both and they are both awesome!
-
I have never had a problem with them and i run 3 different styles regularly.
-
Mine are about a ft longer than the booms so I always put them in the cleat and the excess has never been in the way. No problem stacking with them.
-
What's the price with shipping?
-
Do you have any 12lb's left?
-
Alright it might be a few days but when I got a second I'll take it apart and find out what shipping will be and I'll let you know.
-
-
-
I'll try and find it and get a pic for you tonight
-
20$ and its yours
-
-
I think I have a cannon clamp mount. Don't know what it's worth or what shipping would be but I would be willing to make a deal if you are interested.
-
This was the only pic I had and it was "during construction." I used galvanized 4x4 brackets for attaching a post to a floor they have flanges that go up the 4x4 and another that lays flat along the seat. I then used a 2x6 to run under the whole length of both seats and bolted the brackets to them.
-
-
I used the cannons and was never comfortable with them so I used a 2x6 mounted on 4x4 from the back to middle seats on both sides was an awesome setup and is still being used by my buddy that now has the boat.
-
I've done a lot of reading on here but this is one of my first posts. I just want to say thanks! This formula was a big help in getting my first coppers set up. It worked perfect for me. I didn't need it to the inch I measured the distances with a range finder and everything fit better than I would have guessed. Thanks again!
-
I run a Rod tree on my 16'er and I can run 8-9 rods with a 36" track on both sides when I'm running big boards. My trees have 3 Rod holders and the top is open so it can run 8 rods between my 2 trees and they take up minimal room. I then have 4 other holders down the track on each side. On a smaller boat I think a Rod tree is a great tool. You wouldn't need to add another 100+$ piece of track on each side and if you price out 6 more Rod holders and the tracks the trees are a lot cheaper.
Electric Conversion of Cannon Uni troll 10
in This Old Boat
Posted
If I was going to do the drill thing I would get a 12volt and wire it direct to the boat batteries. If you hard wired ports on each side it could be a short cord and not in the way. I have a 12 volt drill I have used for my auger for 12 or 13 years hooked to a lawn mower battery that thing will drill a lot of 8" holes on a charge.