Fishinjohn

16 hours ago, John nastasi said:

They should take it  down

WELL, one would think that the red banner at top of post that says SOLD/CLOSED would be ENOUGH

Just my .02

38 minutes ago, Flygaff said:

Lake restrictions of 9.9 hp. They don’t seem to care how many you hang on the transom. I upgraded them to 20 hp each. I am keeping my eyes open for a 90 or 115. The boat could be ordered with a 90 or 115 and the hull is rated to 200

MOST LAKES that have a HP restriction around me, allow the boat on the water no matter how big main motor is as long as it's up in the air out of the water...

They dont WANT YOU on plane.. lol

Even if its 2 or 3 smaller motors

I must be missing something here... lol..

I have an alumacraft 185 with a 140hp on it... its rated for a 175hp..

I've personally never heard of anyone putting twin 9.9 kicker motors on a boat that size for its main propulsion...

I have a 9.9 on the back of mine STRICTLY for trolling... I can tell you 100% that with will NEVER put me on plane...

Even 2 of them will never put me on plane...

I'd put a minimum 90hp on that thing.. you'll plane just fine..

I might try to make it out that way Saturday if they are still available 

Location?

On 8/11/2020 at 12:20 PM, HBC said:

Great looking boat that looks like new and not beat to **** like the other one that was for sale on this site a while back.  Starcraft have the best riding boats out there - I also now own a 196 Fishmaster and have owned Starcraft's for many years.

FYI...

You're likely to get hate mail in your inbox now from that individual in regards to that beat up boat

Lol

I always have a snack on board

and when I'm hungry I'll say if I eat they gotta eat

Now THIS boat has been taking care of as can be seen in the pics

What an awesome boat.. Too bad you have to sell it and the next owner will have one hell of a rig

11 hours ago, Jbfish said:

21’    1999 seaswirl striper re powered with 2014 Honda 200 hp four stroke. 2 cannon mag 5 down riggers 36” traxs on each side Lowrance hook 9 and fish hawk has Bimini with full enclosure $25,000

Definitely a sharp looking boat

But a little older than I'm looking for and and I need a boat that I can use on smaller lakes also

Shes a little big !!!

Good luck selling

2 minutes ago, whaler1 said:

Glass or tin?


Sent from my iPhone using Lake Ontario United

I'm open to either

59 minutes ago, Custom Deluxe said:

Hasselmania username on here has a 2009 Starcraft fish master 210 for sale w outboards for low 20’s


Sent from my iPhone using Lake Ontario United

Yes thank you.. I'm not interested in that boat for various reasons!!!!!

Appreciate it

4 minutes ago, hairybumcrack said:

04 Starcraft 1961 Fishmaster with a 3.0L inboard?  Comes with tracks, 2 manual Cannon Unitrolls, rod holders, FF, bowmount, lots of extras.  I'm in Ontario Canada and with the USD where it is, it is a good deal if you don't mind a short drive.  New tires on the trailer as well.

 Definitely dont mind a drive but I'm looking for and outboard, not an io... 

I shouldve put that in original post

Thank you for your reply

11 minutes ago, GeorgeB 802 said:

Will be availible after June 20-2020 little older ‘92 -only have 500hrs 2nd owner need to down size Thompson 240 fisherman if interested text/call 802-681-8109  12,500$

 

Thank you but definitely looking for something newer

Boat I sold was a 1990.. I want to significantly upgrade and also want an outboard (I shouldve put that in my post also)

Looking for a boat that's between 18-20 ft.. no older than a 05 and an outboard, no IO's.

Struck out on 10 different boats online(every one I check on is already sold or is pending) 

Need a boat for this years season

Looking to spend no more than $30k

Interested in this!!!!! Where are you located?

On 9/5/2019 at 11:17 AM, GAMBLER said:

But it is community meat.  That's my only issue with his place.  Great stuff though. 

I am a processor... I have been doing this 15 years now..All sausage that leaves the shop is 100% you're own however the smoke meat is community meat. ..ALOT of guys have "problems" with a community product.. Here is the thing guys have to understand, As a processor I want EVERY SINGLE POUND OF SMOKE MEAT that leaves my shop to be 100% so I go through meat and only use what I feel is good meat..after I'm done inspecting and prepping meat, Bill's, Jim's, Jeff's, George's, Joe's meat is ALL the same quality before it hits the grinder..

Interested

716 378 2955

Text me please 

I will for sure Marty thank you!!

If this is still available at 1st of the year I'm interested 100%

WOWSERS

LOVE THIS BOAT!!!!!!!!

Unfortunately just a tad out of my reach for price

What type of wrap are you looking for?  A vinyl wrap? Or are you looking for winterizing wrap?

 might be better to specify 

Here is one but not sure exactly what you're looking for OR if they have a mobile wrapping service for you

5 hours ago, Finnski14 said:

Niagara Falls NY


Sent from my iPhone using Lake Ontario United

Ok thank you

Where are you located?