samcats
-
Posts
25 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by samcats
-
-
I've heard about a mixture they use. Now is the quick silver 2 stroke oil ok. And my motor is 2 stroke. That is what I don't understand the internals would be coated I asume and in them motors where does the mixing process takes place
Sent from my LG-TP260 using Lake Ontario United mobile app -
I've been using sea foam marine pro motor runs good they say 24 months on gas. But I only use nonlethal gas
Sent from my LG-TP260 using Lake Ontario United mobile app -
Thanks
Sent from my LG-TP260 using Lake Ontario United mobile app -
I have a 02 200hp merc saltwater efi do you fog these engines or just pull the plugs and fog the cylinder. To winterize
-
Thanks bud does he have a tackle shop in the Glenn
Talk to him he had an accident and broke both ankles. He will be out of commission for awhile
- 1
-
Thanks bud does he have a tackle shop in the Glenn
-
Thanks bud
-
Anyone know troutman87 personally
Trying to get a hold of him to order some weights.
If you can contact him I would greatly appreciate it. I sent him a pm.
Thanks for any help
-
Do you use your Makita just for ice fishing. I will use it to retrieve the downrigger weights up on manual downriggers. I have a rigid 535 in lbs I use now. I want to go to heavier weight. Like 12 or 13 ppund
-
Thanks. What is the torque on the Bosch. The new ryobi one is 750. The Milwaukee m18 fuel is 1200 and the rigid is 1300 all capable I'm sure
-
Thanks. What is the torque on the Bosch
-
Does anyone know the hp and torque of a newer cannon motor. Tried cannon customer service waste of time.
I have rigger ease
You use a 18v drill to retrieve the weight Some of the newer drills are pretty beefy torque wise. Between 750 and 1300 in pounds
-
Talked to cannon customer service what a waste. Couldn't give me spec's on motor
-
How big are the motors. I got these things called rigger ease you use a 18v drill for bringing up the weight. Some of these drill are pretty beefy torque wise
-
Gotcha brother thanks lol
-
Thanks and happy fishing
-
Thanks these are manuals. So it would be frames
-
Was wondering has anyone run a few pounds more than manufacturers specs? On the down riggers
-
Yea I think that's I'm goi g to do
-
Trailered for the last owner and myself a couple of drill holes what is the last owner had his trolling motor.
-
The boat is a 1994. Just trying to be safe
-
Hey people got a crestliner 216 eagle sst. Would a moisture meter read threw aluminum. I bought it used about 5 yrs ago want to see if the outer transom needs replace. Could pull lower bolt and see if wood is soft.
Now I have read that plywood best strength is at 22 degrees on a aluminum boat should I even worry. And when lamanating would you use epoxy resin or use 5200 and epoxy to seal the whole outer side thanks
-
Does anyone have a moor subtroll or depth raider they want to sell. I'm new here and hope I'm in the right spot. Thanks
Moor subtroll 900
Depth raider drx10
Or drx10 probe
Fogging a outboard
in This Old Boat
Posted
Well I talked to mercury and according to them you fog the cylinder only for that model. And I would like to thank all who gave there advice it is greatly appreciated
Sent from my LG-TP260 using Lake Ontario United mobile app