Cannon Rear Mount Holders

[maddiemutt]

Does anyone know if you can buy just the mounting pin for the rear mount dual rod holders on a cannon? I have a dual rod holder for the front boom and want to convert it to the back. Thanks

[Broadhorizons]

Yes, I did it this summer. As long as you have the strap or the holder in the back, the pin will work. I got mine from Fish307 for about $10 a piece. I think I also took each holder tube out of the dual front and flipped them 180 degrees to get the angle right in the back position. I had to take the boom off the housing to get the front mount off, one screw easy. Took about 5 minutes per rigger. I'm not too tall so I like the rear mount much better than reaching to get rods out of the front mount.

Good luck,

[Splitshot115]

Maddiemutt,

I got mine right from Johnson Outdoors which have the Cannon brand.

Here's the number. 1-800-227-6433

Splitshot115

[maddiemutt]

Thanks guys for the help.

Best Wishes,

P.J.