MOTOR PRICE QUESTION

[howboutthosemets]

Is $300 Reasonable for a 1977 9.9HP Johnson short shaft? looking for something for my little 1960 14 Footer that isn't going to break the bank and is going to get the job done. Thanks

[BURNIN DAYLIGHT]

thats what i paid for mine years ago mine. over the first year had to replace the seals and after that my coil went so i guess i got what i paid for

[howboutthosemets]

Yeah makes sense

[MCF]

Buy it, going rate is in the $500.00 range.

[Misty IV]

I am running a 1971 6hp Johnson as my kicker. Went through it 2 years ago and did a tune-up and replaced the fuel lines. Still runs like a champ and starts on the 2nd or 3rd pull.

[howboutthosemets]

OK thanks guys. What should I look for to make sure i'm not getting ripped off when I go to check it out.

[rolmops]

Ask them to start the engine. If they offer to start it but do not put it in a barrel or put any muffs on,then do not buy.

Apart from that, even if it runs on the muffs do insist on a compression test and bring your own compression gauge. Also,insist on them opening up the lower oil fill up plug in the lower unit. If the oil is milky there is water in the oil if there is no oil or the screws are loose then there is a problem with the lower unit,which will need repair.

If the compression is good, everything else checks out, and it runs well you will have made a very good deal.

Here is a website that will help many 9.9 and 15 horse owners.

http://www.sschapterpsa.com/ramblings/J ... 9.9_15.htm