Linking Humminbird units

[FishingFool34]

Linking Humminbird units

I'm getting ready to swap out my lowrance units for 2 humminbird units (one bow, one dash). I'm doing this mainly because I recently installed a terrova with iPilot Link. Here I was I want to happen... dash unit connected to terrova for ipilot link functions. Bow unit connected to us2 in terrova for sonar. Is this possible without setting up an entire Ethernet network? Im not sure if you can split the ipilot and us2 functions to separate units. I don't want to set up an Ethernet network atleast right now. I will run all us2/ipilot features off just the bow unit if I have to. 

[ERABBIT]

2 hours ago, FishingFool34 said:

 I will run all us2/ipilot features off just the bow unit if I have to. 

That's the way mine is now. 

I have a splitter around not sure how to hook it up.

Are you also going to have a dash unit with transducer on transom ? 

[FishingFool34]

Yeah dash unit with SI ducer on the transom. But I was hoping to run the ipilot link features from the dash if possible. They are separate cords off the terrova, seems like I should be to just use the us2 on the bow and other cord to dash for ipilot.

Edited May 17, 2017 by FishingFool34

[TrophySeeker]

It requires the same cables to use ipilot link on the bow as it does the dash, just longer one for dash. To share SI transducer as well will require Ethernet switch. Essentially, 2 devices = cables, 3+ devices = cables + switch (hub).

Sent from my SM-G955U using Lake Ontario United mobile app