Jump to content

Copper reel pulling


Recommended Posts

Might be worth sending the reel to Andy Coperhaver at Tuna's Reel Troubles. He is very good  and fast turn around on the reels etc.

Link to comment
Share on other sites

sounds like Les just found your problem. the braid is spinning on the spool , witch makes it look like your drag is slipping. i put elec tape on the spool so the braid seats into the tape , or you can use 50ft of mono line then the braid . 

Link to comment
Share on other sites

Try three levelwind passes of mono, albright knot to backing, albright knot to 10' of 40lb big game (attach planer here), copper next, then fluorocarbon leader.

 

The first time you fish it, attach something that will cause drag in the water like a big paddle or a tripped dipsy. With the boat trolling about 3 mph let all the copper and backing out until you get to the mono at the bottom of the spool, then reel it all back in. This will properly pack the backing. Help guide the backing with your fingers to make sure it's level in the corners. Don't let high or low spots build up next to sides of the spool. Keeping the backing level prevents the backing from digging under itself later down the road causing your line to bind. People usually discover this on the first big fish that runs deep into your backing.

 

 

Sent from my iPhone using Lake Ontario United

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...