Jump to content

for sale : usa 1989 Trophy 2160


Recommended Posts

Well maintained and well equiped 1989 Trophy 2160.  Michigan Motorz installed a new 350 5.7L GM 350 Base engine in 2013 or so.  175 hrs on the main since then, tops.  It has a 2012 Mercury 9.9 remote kicker- eclectic start, long shaft, plumbed to the main tank and controlled by separate remote control at the helm.  It’s mounted via an adventure marine aluminum kicker mount and has a new ez steer connection to the outdrive.  I’ve put alot of love into her: 2018 engine coupler & gimball bearing, electronic ignition, carb rebuilt, thermostat replaced, upgraded gas feed hoses, stainless steel 15x15 four blade Powertech prop and an aluminum Mercury 17x15, new anti-siphon valve, 2018 new macerator in fish box and 2019 new exhausts fan and ducting.


Electric Cisco planer board reels with mounted controls and big john pulleys off the hardtop.  Four Cannon powerports for riggers. 4 Cannon Mag 10 riggers available. All professionally rigged off a separate dedicated fuse box.  Fish Hawk 870 head and receiver (surface temp no worky) works with new Fish Hawk probes. Lowrance 510c and Garmin dedicated GPS with great lakes chip.  Oscillating fan at helm.  LED deck light.  Porta potty in cuddy.  I have slept three in the cuddy when necessary.  It’s a nice layout for a small space.


Rigged with tite-lok and craig’s rodholders.  Nice Lewmar plow anchor with 150’ 1/2 inch rope and chain, two custom Bone Collector aluminum rocket launchers on the hard top hold 12 rods.  Bow pulpit could use some tlc and swim platform ladder was broken by a big boy last year.  Tach needs replaced too if you are picky.


Escort trailer is decent.  Gets me to Ontario once or twice a year.  Brakes are not operational but behind my Nissan Armada it has towed just fine.


Clear Title - NE Ohio location (Mentor)


$5,000.00 fully rigged.









Link to comment
Share on other sites

7 hours ago, Reel Chaos said:

Hey what’s the actual length of this? Also do you have the paperwork that shows all the engine work?


The hull length is 21’ 6”, hence the “2160” model number.  That length does not include the bow pulpit or kicker.  Those add about 3’ if taking a total measurement.


I’ve got all engine paperwork and the paperwork for just about every major maintenance, repair, replacement or upgrade over the years.  Just keep it away from my wife, eh?


 Thanks for your interest.  Shoot me a Message if you want to chat.  


Jarrett Northup

Link to comment
Share on other sites

32 minutes ago, Reel Chaos said:

Do you have any pics of inside?


I think I have a few but I’ll have to search older pics.  I know I took photos of the kicker remote control and I bet a few fish pics have some background.  The cuddy is in good shape but I don’t think I have pics of that.  I’ll post what I find.

Link to comment
Share on other sites

inquiring on behalf of my nephew looking to buy a boat..  He'd like to know if you've had the boat inspected.  If the stringers are good.  # hours on the Kicker?  Do you have maintenance records?  Thank you.

Link to comment
Share on other sites

Boat has not been inspected.  It’s been professionally maintained with an open checkbook over the years, much more than I listed above.  I have most if not all receipts for work/upgrades.

The engine has been pulled several times during work the stringers are good.  Hours on the kicker is an estimate: 250-300.  I’m an attorney who had three kids since I bought it - you could safely say my free time is limited!  I’m lucky to use it 10 times a year.


Is it perfect?  No, it’s 30 years old.  Is it a great value for the $?  Yeah.  You could part it out for as much as my asking price.

Link to comment
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...