Fish hawk 4x

[RD9]

Guys thanks in advance. So I can not get my surface temp and down temp to be correct. I have been on phone with Fish Hawk and they have told me in a sense that I’ll have to deal with it. 

 

So so I go through the process of calibration but it only lets me increase the calibration to within 8 degree of surface temp to the negative.when I turn it off it resets it self to about 13 to 14 degree minus the surface temp. 

 

any ideas??

[Sk8man]

I haven't fiddled with mine as far as this stuff but can you reset it back to factory defaults?

 

[RD9]

Tried shows up way below what surface temp really is. Last year it worked great. 

[Fat Trout]

Not the answer you probably want but i ignore everything surface related on my fishhawk. As long as the probe matches up close enough on speed /temp with my FF when checked close to the surface im happy enough.

Sent from my Pixel 2 using Lake Ontario United mobile app

[reeldilemma33]

Not the answer you probably want but i ignore everything surface related on my fishhawk. As long as the probe matches up close enough on speed /temp with my FF when checked close to the surface im happy enough.

Sent from my Pixel 2 using Lake Ontario United mobile app

Agreed!


Sent from my iPhone using Lake Ontario United mobile app

[HB2]

For what it cost , everything should work . There are times ,especially spring / shallow that you don't need to deploy the probe . 

[Richard]

stupid question: Are you sure it is not the other device that you are comparing it to that is not incorrect?