Two Dipseys on Same Side

[Sweet Caroline]

I want to purchase a third dipsey rod and run two on the starboard side when conditions warrant. I upgraded all my rods to ugly sticks. I’ve been told to use a shorter rod on the inside. Ugly stick has a 7ft medium action rod that I’m thinking of  using as the inside dipsey rod. Any thoughts on using that rod as an inside wire dipsey? It’s rated for 12-20lb. The normal dipsey rod is rated for 12-30lb so I’m not sure it cam handle the stress of wire and a big king. I want to pair that with a saltist 30. Any suggestions on what wire line to get as well. Trying to get everything from fishusa. Thanks in advance

Edited May 24, 2020 by A-Lure-A

[UNREEL]

That Ugly stick sounds like it might be a little light for the wire/dipsey. Medium heavy to heavy would be better. Can't go wrong with Mason 7 strand on FISHUSA. I don't see Blood Run wire offered that I've used before. 

[FishingFool34]

Shimano TDR has a 7'0 MH model available on fishusa, I use the AFW camo wire and haven't had any issues with it. 

Edited May 27, 2020 by FishingFool34

[jigstick]

I run two dipsys off each side all the time without any problems. And all the rods are the same length. Don’t make a problem where there isn’t one. 

[Fishstix]

I run two dipseys on each side. I run a 10ft rod on the outside. It helps get your line out away from the inside rod when letting your dipsey out.