Jump to content

Downrigger extra bait


Recommended Posts

I know some will think this is crazy.  Let me start by saying I will only do this walleye trolling, definitely not trout and salmon.   And also, I run fixed cheaters also for those who are going to say just do that, I do.   I run chamberlain releases on my riggers so my release is above the ball.  This leaves the eyelet on the tail of my ball open.  I was thinking about running a worm harness directly off of this with a 1-2ft piece of 25-30lb fluorocarbon with a snubber between it and the ball.  On my fish hawk rigger I have a good 8-10 inches between the release and ball, I think this will help prevent tangles.  My hopes is to possibly pick up a couple hitch hikers maybe every time I bring the ball up.   I see them come to the ball on my lowrance, so I figured what could it hurt, as long as I can keep it from tangling on the way down of course.  What are people's thoughts, anyone ever tried this?  I talked to one older guy on Erie that says he's done it and it works so I figured what the heck might be worth a try.

Link to comment
Share on other sites

that's awful close to the release line, I would think tangle city, unless both lines were the same set back and same lure so they dropped exactly the same speed. Maybe if the ball line was a diver lure to pull it down faster it would work, good luck, report back on it

Link to comment
Share on other sites

If you bring the ball up often enough this might work in execution. Though, as im sure others will note - it's probably not exactly the best for the fish... if it gets dragged around too long, it could die of exhaustion / drown.

That aside- One of the bigger concerns I'd have with waiting for ball retrieve is that if you pick up something undersized, protected, or out of season and wear it out to exhaustion/ death - what then?

I think it's an interesting way to get another lure in the water, but I'd just stick with the standard approach if it were me.

Sent from my SM-G986U1 using Lake Ontario United mobile app



Link to comment
Share on other sites

Thats a good point that I hadn't considered lightbringer.   I'm not super worried about dragging a walleye because we keep them anyway (an undersized fish goes back of course).   But im definitely not out there looking to intentionally drag and kill fish that is for sure.   We have gotten into the habit of checking rods every 20-25 minutes walleye trolling because we get a lot that don't trip the release or pull drag on the planers.  But I would hate to be that jerk that drags a Sturgeon or something protected or out of season around for even a short period of time.  

Link to comment
Share on other sites

Your main problem will be lowering that setup. It is too close together and the lower line being shorter is prone to get tangled in your cable.


Sent from my iPhone using Lake Ontario United

Link to comment
Share on other sites

This was an old trick from the 90's on Oneida. Release, like a Black's on the cable above the ball. Run a stick bait like a Rapala or Thunderstic Jr. back about 40ft. Small snubber, like a 3/16 dia on the rear eye of the ball, tied to a short leader say 6 ft, pulling a shad Rap ( or similar diver).

 

Don't know about the legality or ethics of dragging a lure in such a fashion as you never know when you have a fish on until you pull the rigger up. I think I recall that being what tipped the scales in the illegal/unethical direction.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...