jabberjaws

On 4/1/2024 at 3:12 PM, FISHINMAN said:

Why are you guys making me relive this 😩😝
 

So here’s pictures of the issue I had. 
 

The rivet was actually sitting on the bunk and was the main leak. We couldn’t find it until we jacked the boat up off the bunks. The other area, were small pieces that were actually like peeling open being eaten away. Someone told me battery acid may have leaked or it could have been from a bad ground somewhere on the boat🤷🏻‍♂️

 

She’s gone now 😩

If that was under a bunk that is what pressure treated lumber does to aluminum. Just a thought. 

To the op if you have a leak under a bunk you won't usually see it by putting water in the boat on the trailer Like others have said jack it up put some blocks in for safety I like the food coloring but don't get it on the carpet.

Good luck.

Very nice. Can't wait to see it when you are finished.

A keel guard after a basic fill in of the voids would give some protection and hide the repair. They are easy to apply Prep the surface then peel and stick.

Mel

I asked an old timer if a mushroom I had found was edible and without even looking he said shure is then after a long pause he said the important thing is if you can eat one a second time. He never did actually answer my question but I got his point.

I purchased a Trollmaster this spring and it will not power up out of the box I have only managed to get someone to answer the phone once out of at least 50 calls to tell me to go through the vender I bought it from. It has been installed and they say it is a warranty issue. I had a Controllking on a previous boat and it was great. No experience with any others. Good luck. Mel 

The height looks good. It looks like there is a row of rivets in front of your transducer what will cause interference. I would go with the other suggestions and put a transducer mounting plate on it and move it so that there's nothing in front of it it. Good luck.

Ramel