antney1

TTT

TTT

22,900

It's time the Gettin' Some finds herself a new home.   $22,900.00

General Boat Info
   Make : Trophy
   Model : 2052 Walkaround
   Model Year : 2004
   Engine : 4.3L Mercruiser
   Outdrive : Alpha 1

Measurements / Dimensions
   Beam : 8 ft. 1 in
   Beam - Meters : 2.46
   Beam - Inches : 97
   Deadrise : 19℃
   Draft [max] - Detail : Draft Hull: 1 ft. 5 in.
Draft Max: 2 ft. 9 in
   Draft [max] - Meters : 0.84
   Draft [max] - Inches : 33
   Weight - Detail : 3500 lbs
   Weight - kg : 1587.57
   Weight - lbs. : 35
   Height [transom] : Bridge Clearance Max: 7 ft. 3 in
   Length overall - Detail : 21 ft. 7 in.
Length Rigged: 23 ft. 10 in. Includes engine mounted and swim platform
   Length overall - Meters : 7.26
   Length overall - Inches : 286

Engine and Drivetrain
   Fuel tank capacity - Liters : 321.76
   Fuel tank capacity - Gal : 85

Comes with are .....
Karavan dual axel trailer, all tires new spring 2023.
Yamaha 9.9 kicker
DIY planer board mast
Big Jon planer board rail mounts reels (2)
HSG quad rod holders (2)
Big Jon dual dipsey rod holders (2)
Chute rod holder (1)
Cannon Mag 20 with covers on 8" risers (2).. boards replaced fall 2022
Rigger ball babies
Fish Hawk X4
SI-Tex SP-110C autopilot w/EZ steer
Ray53 VHF
Fusion marine radio w/speakers
Humminbird 1159 CI HD sonar/GPS
Pedestal seat 
Full cockpit enclosure
Helm cover
Dual batteries with battery switch
Raw water washdown

Garage kept winters, meticulously maintained

Well a buddy of mine gave me a 4 blade 16 pitch to try out today and what a difference.. in a few seconds up on plane, 4200 wot… manual says 4400-4800 is the range so im pleased. This was with just myself, my gf and 1/4 tank of gas. Out tomorrow with a buddy thatll add another 230+ lbs of beef… well see how she does 

Plugs and holes ? Not to sound stupid but i have no idea what plugs and holes in a prop are. The 21 pitch prop was doing 3600 at wot and only 11mph until it finally creeped up to plane topping out around 4000. When i tried the temp replacement prop the tach was going crazy between 5000-6000 and not wanting to damage my motor i pulled back and came back. 

Thank you Mahine, shes got tabs. I will see if i can find your prop and test it

Ive had the boat since ‘12, never was an issue. Last fall was doing the same thing but was told it was algae on the bottom creating a suction, i thought it was because my prop was dinged up

I have a 2004 trophy pro 2052 with a 4.3 mercruiser, alpha 1 outdrive, heres my issue… when i get out of the river and throw the hammer down im getting 3600rpm, boat only doing +\- 11mph… eventually the mph creeps up (takes a long long time) then eventually gets in the mid/upper teens and planes out. At that point im at +\- 4k rpm. New plugs, cap & rotor. I had the prop replaced last fall before putting it away for the winter.. discovered the prop was a 14.25, 21 pitch. Beth at Mike’s gave me a 14.25, 18 pitch to try out, got to the lake, hammer down, rpms were over 5k but still not going anywhere… thoughts ??

While out this past weekend, after landing a brown, I put the lip grippers on the fish connected the wrist strap to a line and back in the water after cutting the gills to bleed out. After a couple minutes I ago to retrieve the fish and you guessed it... NO FISH... but the grippers were still clamped shut.

Has this happened to anyone else, is there a fix or should I stop bleeding them out with the grippers and just throw em back in with just a cord thru the gills ?

Tks

When finishing up the day and probably the season last Sunday morning one of my riggers failed to stop when breaking the water. Luckily my buddy was paying attention and unplugged it. Back at the dock I dropped the weight in the water and as soon as I plugged the rigger back in it wanted to retrieve. Anyone out there ever have a similar issue ? Simple as replacing the switch ?

Thanks

I have a Magda Pro 30dx reel that was purchased this past winter. When flicking the lever to put it into freespool this does not work. Has anyone else come across this issue and have a simple repair ?

If not, who in the pulaski area repairs reels ?

Thank you

Just spoke with a conservation officer. He said that if your boat is in the water and you can get to it that you're free to use it. Also said if a launch is not barricaded you're able to use that as well. He did say they were not given any direction on how to enforce the ruling. 

He did say that marinas were not essential and had to close. I asked about repairs and gas, repairs were only for essential boats (police ect..) they can't be open to sell gas. 

how & what needs to be done ?

I have an EZ Steer connected from an Alpha I outdrive to a yamaha 9.9 kicker. When turning left the kicker is barely angles and with alittle bit of a wind won't turn the boat. Turning right the kicker turns just fine. When back at the dock I turned wheel to the left and noticed the tube compressed. If I detach the easy steer I'm able to push the kicker in either direction

Any input would be appreciated

I have been making them and have seen all the video. I have a ton of flies so cutting them down to 2.5" for teasers is no big deal. My only question was whether or not I needed a bead chain. At his point I think I'm going to add a ball bearing swivel roughly 18" above the meat head and tie the teasers above that. Put a loop on the flouro and attach that to the snap swivel on the flasher

Decided this year will be the year to finally throw meat into the mix. And since I'm the kind of person that enjoys catching fish from something I make myself I thought I would look into making meat rigs. What I have done so far is started with 3 arms length of 50lb flouro, snelled a treble on, added two beads, snelled an octopus on then a dreamweaver meat head. Up past the head I cut 3 trolling flies down to 2-2.5 inches for my teasers and put them on the line by looping small beads. Now heres my question.......... do I need to use a bead chain ??? My thought was to put a loop at the end like when making flies and this loop would connect to the snap swivel on the flasher and this would prevent line twist.

Looking forward to your input

Small holder built from heavy gauge metal. Formerly an Army ammo can. Holder is water tight and comes with 18 dividers, enough to hold 108 spoons. Will hold stinger and stingray sized. Larger box comes with 27 dividers, will hold 216 spoons. Top compartments for storage of split rings or swivels. $30 for the small, $45 for the large. Pickup in Rome/Utica/Pulaski/Mexico

Sent from my SM-J727P using Lake Ontario United mobile app

Looking for recommendations on an autopilot for the above referenced. Boat has an I/O with rack n pinion steering

I purchased a 4x2 folding table from Walmat. Folds into a 2x2 square making it easy to store down below. Adjustable legs and fits perfectly over my doghouse. I cut a hole to put my knives to keep them from sliding off. For $48 didnt think you could beat the price, table is made of HDPE. https://www.walmart.com/ip/Best-Choice-Products-4ft-Indoor-Outdoor-Folding-Portable-Plastic-Picnic-Party-Dining-Camp-Table-w-Handle-Lock-White/150299151?athcpid=150299151&athpgid=athenaItemPage&athcgid=null&athznid=PWVUB&athieid=v0&athstid=CS002&athguid=466001f5-29985e8c-2963a94ae74d01b2&athena=true

send me your cell and I'll text or call you later on this afternoon

Would you consider making me a couple? If so what would you charge me for them. Very interested!!!


Sent from my iPhone using Lake Ontario United

For those of you that want a special mate storage box but don't think the $65 price tag is worth it. I am going to try to duplicate the box for a much lower cost. Might not be professional but will do the job. Standby for future posts in classified section. Considering gluing foam to top so that LED lights can be added to energize the glow spoons. The hunt for foam is on 

Sent from my SM-J727P using Lake Ontario United mobile app

What’s throwing me for a loop is how to clear the transom 

Try the Alberto knot (Google the video). Very easy to tie, very strong, goes thru eyes no problem

Sent from my SM-G930P using Lake Ontario United mobile app