Erbyjoe

What's a few inches Sorry feet of ice Piece of cake I think Chad Great video I wonder how long there trolling season is? Two days

Ray funny stuff I'm Glad I live on the east coast or was that west coast Oh yeah the east coast ( Sorry stan it was there I just had to )

Dave the best thing you could do is take a charter for the day you will cut off years of learning and see it first hand what to do and ask as many question you can think of.There are a lot of great charters captains on this site that would be Happy to take you out and have some fun.You just got to pick which one you like from the area you want to port out of. Good luck and be Safe out there

Hank I will take what FX is taking

Billy I believe the fishn chip is just lake Ontario I can't remember but I don't think it has any of the finger lakes on it but I could be wrong my boat is locked up so I can't get to it to check.

Brain try this site you might be abole to get last years chip for less $$

http://www.hodgesmarine.com/Mapping-Car ... y-s/42.htm

Ray here is a site that has good prices on charts

http://www.hodgesmarine.com/Mapping-Car ... y-s/42.htm

I'm not sure about the Fishin chip you might have to call navionics

I will 3rd what Billy and Musky said I also got the fishin chip map that has the contor lay out of the whole lake great stuff

I think most of us run wire dipseys or copper to get deep I don't know if any one runs them. At one time I use to see something about a pink lady which I think is a diver but for the most part I think using dipseys on wire line are the main diver used. But that's just me I could be wrong

Stan how is your mast for the board attached to your boat?

Are you sure that's not Bait And toshae for the open water jab that was good even thow your on the West coast

Ray that's the best you have looked in a long time

Has any one seen or talked to any one about the New HDS broadband fishfinders from lowrance? If so What do you think?

Happy Birthday Jason

Good job Jax your the man

Tom great post

Thanks guys when it comes to drilling Hole I will agree I'm a wuse I will probly put 2 more holes in the Boat but am not going to like it

John your a funny guy but

I don't think you could get bob away from the donuts anyway

Let me know What Jimmy and Karen says Thanks.

I will give you a call next week

Brad those are also some options it's the swim platform that is causing the air bubbles when I troll I can see a little tornado right by the ducer so when I'm going in to the waves I lose the screen on my 620 I have been trying to fix this for 3 years so this is my next step I can't look at the boat its stored away until april at a barn at a fair ground out here. i was hoping it would have been an easy fix but I guess not

Hank Ok I will let it go just this once But why would a glass be different my boat is painted where the plate will go?

John just remeber the holic I lost count of the # of holes we put in her

Hank ERWIN It's come down to ERWIN I'm hurt After all I have said about RAY this is how you treat me You don't think that the ducer will pop up before the plate comes off the back? I hate to put any more holes in the boat My first boat was like swiss cheese I don't want my Lund to look like that. If that what it takes I will do it But I won't be happy about it

No I want it to be on there for good plus it has to be able to handle 50 mph but thanks for the help

Gambler I never thought of duck Tape but was trying to see how I could Tie wrap it on .

Musky Your a funny man Maybe I could rent you and Ray to sit in the front But I don't think that would work I need my motor in the water also

Jeff Thanks for the info But my Transducer is not a thru hull it mounts on the transom of My Lund It's a mounting plate that is normal mounted on the back of the boat with screws that I'm asking about. I have one already on the starboard side I need one on the port side but I really don't want to drill holes.

I was wondering if any one has a suggestion on Attaching a plastic mounting plate on the transom of my boat with out drilling hole. I was thinking of a water proof sealant or something you would use for putting around windows outside.Or some kind of adhesive. I have to move my transducer to the other side of the Main motor because of air interfering with the ducer but I would rather not drill holes. There is cleaner water coming thru on the kicker side of the boat I think the swim platform is causing air which is screwing up my Furuno 620 screen. Any help would be great thanks in advance

You got that right Johnny boy e mail me your new address or PM me yours.Can't wait to see the Waddlers Yankee Thanks again

YT Pm sent

I use this type of bead swivels and they are great instead of barrel swivels. small but do a great job with line twist and are small enough to come Thur the eyes of all of my rigger rods I get mine at the THE SLIPPERY SINKER ( 716-778-0713 ) in Newfane ( Olcott harbor) I run them for my lead core and main rigger line tie them on with a regular improved cinch knot or what ever you feel comfy with. The sizes are in lbs I believe you can give them a call and they will set you up and answer any of your questions this is a great little shop with everything you need.

http://www.p-line.com/product_detail.php?id=600 (It's the 2nd swivel in looking from left to right)