Jump to content

gotaway

Members
  • Posts

    90
  • Joined

  • Last visited

1 Follower

About gotaway

  • Birthday 02/06/1951

Profile Information

  • Gender
    Male
  • Location
    glenville , ny
  • Interests
    fishin' / Huntn' /building fishn rods

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

gotaway's Achievements

0

Reputation

  1. this is the manual for this unit https://www.manualslib.com/manual/313947/Raymarine-Autohelm-2000.html
  2. looking at the picture..... the flat metal plate mounts to the front of the motor. (I mounted it to the carry handle)...the plate has a ball where the ram attaches with a quick connect........ the other end of the ram has a ss stem that mounts to the clear lexan mount...to remove the ram, disconnect at the motor using quick connect....lift the stem from the mount.....unscrerw the power lead
  3. you cannot enter a course,, but it will steer to what heading you're on when you engage the unit by pressing the auto button.... the helm unit determines a deviation in course and automatically makes the needed adjustment by operation of the ram which is connected to the kicker
  4. https://www.manualslib.com/manual/313947/Raymarine-Autohelm-2000.html Raymarine Autohelm 2000...linear autopilot with wired remote....This is configured for use with a auxillary trolling motor...includes mounting bracket to kicker, quick disconnect and storage bag Control unit mounts at the helm, has standby and auto function.... able to override and control kicker by One degree or Ten degrees Port or Starboard with push of button Wired remote has the same function as the helm unit but allows for course correction at the back of the boat I used this on my 19 Starcraft Islander with a 9.9 Yamaha....no longer have the boat so I'm selling....works perfectly, I can demo all functions..I live in Scotia, NY (capital district)... ................................. $ 250 .............................
  5. I have 2 copper rigs to sell, got a smaller boat, cutting back on what I carry * Okuma convector CV 55 S , 6.2:1 gear ratio, power handle , loaded with 400' 45# copper, 300 yds power pro backing * Okuma convector CN 55 S , 6.2:1 gear ratio, power handle , loaded with 300' 45# copper, 250 yds 25# mono backing * EACH REEL IS MOUNTED ON A , 7' custom rod ; Eglass rod blank, Fugi reel seat w/ cushioned hoods, high density Hypalon grips, indexed butt plate, 11 stainless steel guides ...black on black.... Med soft tip , plenty of backbone for leverage $150 each combo.......... the reels are fresh, no chips or scuffs on rods or reels I also have an Okuma convector CV 55 W with power handle, this is a large capacity reel ( 660 yds / 30#), I had 500' 45# copper and 300 yds PP on it with room left........... I sent this reel to Tuna Tom, had a tournament drag put in and had the gear ratio increased to 6.2:1 (it was 4.0:1).....there is no line on this reel but I'll include a rod ( I think it's a 8' spiral wrap)............. $90 I'll send pix if requested......I'm in the Schenectady area but I get to Utica occaisonally I'm going to the ELOSTA TACKLE SWAP this SAT. (14th), I can bring them if you want to check em out Joe 518 428 0547
  6. model # T9.9 ELRQ With controls...116" new cables Elec start, charging system 28 1/2" from mounting yoke to center of prop serviced 4/17/13, have receipts runs good, no issues .............$ 800 ......... Joe @ 518 428 0547....Schenectady, N.Y. S O L D
  7. Holds 5 rods verticle on top + 1 angled to the rear (adjustable) + 2 side holders(adjustable) total of 8 positions made of 1 1/2" Stainless steel tubing Strong and solid enough to hang onto on rough days It is designed to use in 90 degree (vertical) recessed rod holders(easy to remove for storage), I used hvy duty Smith holders, they're available if you need them, or add a plate to each leg note the corners can be disassembled for easy transport, also allowing an easy way to make the legs narrower located in Schenectady, NY..... $450 call Joe @ 518 428 0547 ,,,,,
  8. gotaway

    Sold / Closed '86 Starcraft Islander 19'

    yup, sold....thanks
  9. Nick, not sure of the year...I bought them 5 yrs ago second hand, had them checked out, new type swivel pulleys added....I've used them approx.10-15 days per year since....end of last year I added new covers......... No warped pulleys, they look good and work as they should
  10. 2 SCOTTY elec Downriggers, mod. # 1105 4' booms, updated swivel pulleys Swivel mounts 3 Weights Blacks releases Wiring harness w/ Scotty plugs and circuit breakers .......................$600...................Joe 518 428 0547...............Schenectady, NY
  11. 2 Scotty riggers with 4' SS booms, swivel bases and mounting plates, Blacks releases and weights, complete with wiring harness and circuit breakers ............$ 600 ..................................................................... ... Joe ......... 518 428 0547 ............................. located in the Albany area I'll be out of town 5/18 - 5/26 but riggers will be available
×
×
  • Create New...