Striperhound

go into the fishing mode and change it to deep water mode. Any time I am in over 60 feet of water this is the best picture. Also make sure your fish alarms are off and surface noise is low. and bump up the gain to 95% plus. I get a great picture with these guidelines.

how much

later in summer when the thermocline sets up go off the pump house in 80 foot of water and look on your graph for fish suspended 20-40 down over 80 to 100. most of those marks are suspended smallies and big. drop a sawbelly down and put rod in rod holder and have a beer. When rod doubles over reel in 4-5 lb smallies. Very consistent and over looked way to catch giant smallies. I also did very well in 8-15 ft of water on east side of lake sand and gravel flats with cray fish drifting around the flats.

8 wrap uni to uni to attach flouro to braid is great

Just reading the reports fish are spread out lake wide, warmer than avg temps for the lake, warm winter, are we seeing a high point in the salmon stock or just a warm winters effects? Why are areas like Oswego holding so many spring kings this year?

What does everyone think?

good info who makes the 45 gram jigs I cant seem to find any, shimano?

will running my lowrance most of the day without the boat running, run down the starting battery to the point that I may not be able to start my rig?

HAVE YOU EVER USED THE BUTTERFLY JIGS IN THE FINGER LAKES, THEY SEEM A LITTLE HEAVY AT ALMOST 2 OZ'S. DOES ANYONE MAKE A BUTTERFLY IN THE 1-1.5 OZ RANGE?

I am getting alot of noise on my lowrance from my minn kota. I have two batteries I run the lowrance and minn kota to the same battery so I dont run down the cranking battery. Thoughts on how to fix. Are there any solutions other than rewiring to the main starting battery?

is the heartland rod green in color and the 8'6 salmon rod or the walleye rod and can you ship?

Anyone have a pair of used waders with no leaks for a 9 year old boy.

Looking to see if anyone can recommend someone near albany NY to install a bow mounted minn kota on my triumph center console. Need to relocate bow light and install motor. looking for clean installation.

Thanks just what I was looking for.

for those of use with center consoles. Does anyone know of someone who makes a rain cover for fishfinders so they dont get wet?

Anyone use these with an consistency, pro's and con's.

do you have a 4th rod

are they the 8 foot or 9 foot rods?

I do some deep water jigging for lakers in the finger lakes. Looking to pick up a down temp device. Any other options or suggestions

do you put the riggers on using gimbal mounts in the flush mounted rod holders

are you taking offers on the pair?

thanks guys appreciate the info

Been jigging starting to have some success but still need to dial it in. I drop to bottom, jig a few times and reel to surface. Is this the best method or should I be doing something else? Looking for some more pointers.

so you are basically jigging a few times and then slowly reeling all the way up to the surface, drop and do it over again. I was trying to keep it with in 10-15 feet of the bottishom where I was seeing I have a lowrance HDS 5, I had the sensitivity way up so I could see my line and jig you would see fish come up look and go back down. So the fish will follow up 50-80 feet before striking? The reel up should it be slow and steady or fast?

Thanks guys for all the info, I am fishing Lake George

What is the jigging stoke. I was out today and would jig a few times slow lifts let fall then reel up 10 feet, drop and start over. Had many short strikes and could not hook up soft tip on the pole I was using. Also I was using the new zoom super fluke paddle tails at 5 inches they seemed a little long not helping with the short strikes. Is everyone using the 3" soft plastics? Also what depth works best I was mainly fishing 115-135 because the picture was good in those depths. Any help would be great as I learn jigging for LT

Thanks, I will give you a call this weekend. I am in Albany NY. Did you have installed in Rochester. I would be willing to trailer it that way to get done right. No one around here will do it. If you could email me some photos of the mounting and plug in spot that would be great. My email is [email protected]. Where did you put the 2nd battery, also what type of time did you get out of the 12 volt motor and shaft length. Sorry for all the questions.