Jump to content

martyp

Members
  • Posts

    26
  • Joined

  • Last visited

Everything posted by martyp

  1. planer board mast have been sold. I would like to get 275. for the downriggers ,thanks
  2. That is correct, they are speedtrol made in michigan and mostly stainless high quality mast with many adjustments for hieght . You will never need another
  3. someone is looking at the mast that are stainless steel and heavy duty and look like new. The riggers are older but one is in great shape but the other has a hose clamp around the pulley and neck that seems to be working but I have not used it personally. I would take a little less for that one. thanks, Marty
  4. short arm mag10s come with swivel mounts. 6 ft planerboard mast comes with cannon gimble mounts. would like to sell together but would consider offer. thanks 315-369-8541
  5. Great fish Chris, met you at the gas pumps Thursday. Your reports have are very helpful.
  6. Thanks, that should help
  7. does anyone have a recomendation for a good power gripper with scale for salom catch and release? thanks, Marty
  8. Fishing Report Your Name / Boat Name:martyp 264 wellcraft ============== TRIP OVERVIEW ============== Date(s):8/31 Time on Water:6pm to 8pm Weather/Temp:79 Wind Speed/Direction: Waves: calm Surface Temp:76 Location:i-bay LAT/LONG (GPS Cords): =============== FISHING RESULTS =============== Total Hits: 1 Total Boated:1 Species Breakdown:king Hot Lure: 28nk not sure the name Trolling Speed: 2.7 Down Speed: 2.5 to 3.0 Boat Depth: 120 Lure Depth: 80 Took the wife out for a relaxing evening and a little late season fishing and set the first rigger and was about to set the other when this brut hit. Without a scale I guess he was in the 30 lb range. He only had one good run in him before he gave up but was still alot of fun. I spent 5 minutes trying to revive him and to my surprise he swam straight down so I suspect he made it. One was enough tonight ==================== SUMMARY & FURTHER DETAILS ====================
  9. Thanks to all, I should be able to land some of the bigger steelies now!!!!
  10. Hello fellow fish freaks, Just wondering if the fish that are dancing and spitting my spoon are steelhead and is there a technique to keep them on? thanks, Martyp
  11. I had a crazy idea to have a bracket attached to both motors except the bracket would have to pivit as the big motors turn. there is 10 inches between the motors so I think the 9.9 high thrust long shaft on the side will have to do it . thanks for all your help. oh, the batteries are dead center
  12. seems like a 9.9 high thrust will work if its not to windy. thanks
  13. Thanks, I should pass on the motor but i'm not convinced the 9.9 would be big enough. Either way, I have to have some kind of special mount built and I hope its worth it. thanks again, Marty on the bay 264 wellcraft
  14. I found a 1998 25hp 4 stroke mercury mariner kicker with controls and electric start that is in mint condition. Very little use. My question is, do I spend the time and money to have my boat modified to make this motor work? I have two 150 gas guzzeling outboards pushing a 6000 lb boat. The transom is full and the only place to put the kicker in on the same side as the driver witch I'm afraid will cause the boat to tilt to one side. I would spend alot more time on the water if I had the right setup. Someone told me a 9.9 four stroke woulden't be big enough.
  15. hey fellow fishermen, I have these two nice mast with reels and went out and bought two gimble mounts. Now all I need is the planer boards. My question is, Am I wasting my time with all this gear if i probably won't ever have more than four lines in the water? thanks marty
  16. 6 ft tall, excellent condition. Irondiquoit bay, cell 315-369-8541 don't forget to click on pic to see close up
  17. update; Here the pics for the mast, they are made by speerdtrol
  18. I have two like new single reel mast that are 6 ft long .$100 each
  19. Name: marty p Location:Ibay Home Port:Ibay Boat Name/Type:264 wellcraft coastal I fish for:browns, lakers and salmon ================== Hi everyone, sure is different than pulling lead core for lakers in the adirondacks. Moved here from Old Forge a couple of years ago and am determined to learn the ropes on the big water. Bought everything I think I need except a probe and I'll probably get that soon. I 'm dying to get into the shallow water fishing in the spring. I found a couple of out riggers and am about to build the planer boards . hopefully the plans I found on line will do the trick. The only other issue I may have is the two 150 carberated out boards that will be idleing for many hours. I may buy a little 4stroke trolling motor if there is a way to mount it. Anyway, I hope to be able to report any success on this site spring and summer.
×
×
  • Create New...