Jump to content

cuseroller

Members
  • Posts

    68
  • Joined

  • Last visited

Everything posted by cuseroller

  1. Moving and need to sell my little trolling rig. 1989 20' sportcraft fishmaster. 4 cylinder I/o mercruiser. New impeller kit last spring. Runs and idles great for trolling. Calkins tandem axle trailer. Has Bimini top. Bought rig two seasons ago for $3,500. Since then put custom stainless rocket launcher on. Two Scotty downriggers electric with dual rod holders. Lowrance elite 5 hdi with map card. Scottys have swivel bases and brand new chamberlain releases. I would also give you my 12lb weights. Has dual planer board mast also with set of homemade boards. Spent $500 on rocket launcher plus added 6 stainless adjustable clamp on rod holders. $500 on lowrance. $500 on two scottys. Floor is not original fiberglass it's replaced resin and gel coated plywood. And there are few gel coated patches on boat from old drainage system that leaked. Boat is solid starter boat, trailers easy. Boats parked at friends. Have to get few more pics. Text or call only no pm's please. $3,500 Matt 315-877-2041 Sent from my iPhone using Lake Ontario United mobile app
  2. Sounds good guys thanks for the help! Sent from my iPhone using Lake Ontario United
  3. Antlers wanted Want to buy antlers, racks or sheds can be singles. Have to be medium to large horns. 4 points or better. $10 a piece or $20 for racks. Need for project looking for as many as I can get. Call or text me, don't check forum often. Syracuse area. Matt 315-877-2041
  4. Looking for a big jon manual planer reel, only need one but willing to take the whole mast with two reels. Please give me a call or text. 315)877-2041
  5. I got the islander out of shrink wrap, put rocket launcher, rod holders, and down riggers back on Saturday. I ran the boat on muffs she started right up and ran smooth. Easter morning, I went out to make sure she was ready for fishing and she ran great. I trolled from wrights landing east made a few passes and went 6 for 7 on brown trout.
  6. It's a 165 hp merc I/O 4 cylinder. It is really good on gas. I could troll all day on $40, plus it gets down to those trolling speeds just fine in calm water.
  7. transom is solid. I never had any issues, it is an I/O. when I gutted and replaced the floor, I had my uncle check it out. He said it didn't need to be replaced. Since he is a certified mercury mechanic, and I have seen him do full boat and muscle car restorations over the years, that's good enough for me. that was last spring, and had no intentions of selling.
  8. Sorry for any mix up, this is a 1987 StarCraft Islander and is 22 foot long. I double checked the title and is an 87', 22'.
  9. pricing pictures and other info is at this link; Link to full info and pictures below: http://syracuse.crai...4422626645.html Thank you
  10. 1987 22 Foot Starcraft Islander hardtop fishing/trolling Boat. Many upgrades, floors been redone, cuddy cabin reupholstered, downriggers, rod holders, and electronics stay with boat, Tandem axle trailer included. You can call or text Matt @ 315)877-2041. Link to full info and pictures below: http://syracuse.craigslist.org/boa/4422626645.html THIS AD HAS BEEN UPDATED, I CHECKED THE TITLE FOR ACCURATE INFO. THE BOAT IS 22 FOOT LONG, IT IS A 165 I/O MERCURY, AND IT IS AN 87'. I HOPE TO HAVE BOAT RIGGED AND READY FOR WATER TOMORROW(4/16/14). PLEASE READ THE CRAIGSLIST AD, IF YOU ARE INTERESTED. FEEL FREE TO CONTACT ME IF YOU HAVE QUESTIONS ABOUT THE BOAT, THAT ARENT LISTED IN THE AD. THANKS - MATT
  11. on water at 5am. just me and wife didn't want to get too complicated with my set up. skipped browns, tried for silver. Ran 2 riggers, 2 dipsies, and one leadcore, didn't bring copper, also didn't have my speed and temp on so no temps for you. slow day landed 1 steely on leadcore. couldn't find the bite with out temp tried everywhere but steely came in 180FOW on 7 or 8 colors. Main reason for my post was to ask about a boat. I saw a sweet boat pass me when I was leaving. The boat was being delivered on a Semi truck flat bed, so pretty big fishing boat. Boat name was Blue pearl I think barely saw it in my rearview. I was just wondering if anybody knows the boat, It looked like a Sweet Boat just wondering if anybody knew the make or model.
  12. Color 10 Feet 20 Feet 30 Feet Red 6.5% 0.4% 0.25% Orange 50% 25% 12% Yellow 73% 53% 40% Green 88% 78% 69% Got this off a different site and pasted it in. Hope this helps
  13. Color matters look at a color spectrum chart. Certain colors are only visible to certain depths in the water column in the light. Red orange are for top of water column and don't work nearly as well in deep water as blues and greens.
  14. Selling pair of cool ride boat seats on swivel pedestal bases. In like new condition. Seats also fold down. Captains style seats with out armrests. Selling for Uncle, came off his boat. Asking $120.00 Or Best Offer. PM or you can Call or text Matt 315)877-2041.
  15. I didn't want a single mast on both sides of the hardtop to crawl around to get up front. I bought a used double reel planer mast, got rid of the mast and mounted the reels right on the top back corners of my hardtop. They're higher than the mast, so planer lines off water better in rough seas and no masts in way.
  16. So I hear about this spectra line for planer boards but it's expensive and I had an idea for replacing Dacron with para cord. Para cord is 500 lb test and you can get in neon yellow 500' for less than $10. I know it's a thicker diameter and may absorb more water but my homemade boards pull really hard. So has anyone ever tried para cord for this? Or any suggestions
  17. Try byerlys custom fabrication. He makes all welded aluminum fishing gear. His prices are great. He made and shipped me a custom 8 rod rocket launcher for mounting on my boats hardtop for under $300. He has a website and an eBay store.
  18. Gutted boat floor want to wrap my plywood with vinyl b4 I rivet down. I've heard and seen it both ways. Is there any issue with riveting over my vinyl. My reason for doing it that way is so I have no seams on floor. Vinyl came 6' wide so would have seams unless I individually wrap each strip of plywood. Thanks for any advice.
  19. I have a list of things for sale that I can bring to the ELOSTA tackle swap tomorrow If anyone is interested. Matt -315)877-2041 Quad Rod holders aluminum and welded adjustable - $200 OBO Cannon Electric downrigger with 12# weight, 3 rod holders, stainless steel wire, ball retriever - $300 OBO Ram Mount for lowrance or humminbird fishfinder 5lb weight capacity. - $15 Planer boards made of solid pvc plastic homemade doubles, made 2 sets with amount of pvc I had, I only need one for my boat. work great - $40
  20. A used electric cannon with 3 rod holders, ss wire, 1 -12#lb rigger weight, swivel base, and ball retriever for $300 is a steal I thought.
  21. I have 1 used Cannon electric downrigger, has linecounter, 3 rod holders, ball retriever, and one 12# downrigger weight. Rigger is spooled with one season old SS wire. Downrigger boom length is 40". Price is $300. Located in Syracuse. Reply, Call, or Text: Matt 315)877-2041
×
×
  • Create New...