Jump to content

cedarswamp

Members
  • Posts

    536
  • Joined

  • Last visited

Posts posted by cedarswamp

  1. You are gonna need a Motor Bracket , Panther makes a good one! A 20" shaft (long) shaft is more than long enough, with that boat and a Panther mount a short 15" shaft outboard would work fine! As far as motor size , a 5-8 HP is plenty , and this will keep the weight down on transom also. As far as a fish finder for $400, there is quite a bit to choose from, I would recommend a side scan imaging as well as something with a GPS built in. Shop around , talk with others on their diffrent units.

  2. I have a Parker Cyclone Crossbow , The Bows been to Parker they sent me back a New Bow, I had already purchased a new Ten Point so I don't need 2, Its hasn't been fired since coming back from Parker so would need to be sighted in like any new Crossbow, comes with a nice parker scope with the different dots for the yardages, and this was always spot on out to 60 yds., I have at least 6 Bolts to go with it with capture nocks, Has the cocking aid also. When I originally purchased this Crossbow it was over $800, With me not needing a second crossbow , I'll sell this for $475 Plus shipping if needed. 

  3. Just bought this boat, and it ran rough when i purchased it, so before taking it out I did the tune up, a buddy also said the timing could be off a little! Boat is an Aluminum 93 Starcraft, 19' Superfisherman! Kicker is up when running with 3.0, I will check the linkage to carb. also

  4. I have a 3.0 Mercruiser in a 19' Starcraft superfisherman, Doesn't want to get on Plane and at Top speed only reaches 25MPH , I have done a complete tune up , to engine! I do have a Honda Kicker motor also mounted , so there is that added weight. Seems like this set up should run in low 30s anyway, Does anyone have any suggestions? 

×
×
  • Create New...