PhlyanPan
-
Posts
174 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by PhlyanPan
-
-
Buy the programming cable and get the chirp software. It's super easy to program that way. Just have to make sure you get the right cable, there's lots of knock odds that don't work very well.
-
My advice would be to get rid of the Okuma reels......
I'll be accepting donations to do just that (what do you recommend instead?)....until then...can these things be fixed? Yes the spools are full. I have a couple that work fine and used them to spool the line backwards and calibrate it using a measured 100' mark then spooled it onto the spools that didn't work.
-
Would you ship them? I'm interested in at least one of the reels if not both.
-
I've got some okuma magda line counter reels that the counter is never accurate on. I've seen it a few times where the first digit rolls over past 9 but the second digit doesn't change although there could be other issues as well. Are these things repairable or rebuildable?
-
Well done all around. The camera view was great, the explanations were great, and kudos to you for wearing your pfd while fishing alone. Many don't. Really good video, thanks for sharing!
-
Just get a dipsey rod. They can be had relatively cheap. Like less than $30
-
I've heard to wash with lemon dish soap. I have some on the boat but haven't tried it yet. I also have a couple of cans of anchovies to scent them with....again, haven't tried it.
-
I use 30 lb blood run wire. 1000 foot spool and split it between two reels with 30 lb mono backing joined by a tiny swivel that will go through the guides and lay on the spool.
-
Have you guys ever tested your knot strength? I did some tests on 12 lb fluoro a while back and with a polomar knot was only getting 70-80% breaking strength. There's another knot that I was getting close to 100% with (a couple times more than 100%) but I don't know if it has a name. This is where I learned it:
It's a pain to learn but once you get the hang it's not that bad.
-
consider separating?
-
If someone is fishing near you and has a probe, see if they'll give you temp at a depth and down speed vs gps speed. That will get you really close on temp and speed using your gps.
-
I run my bag off the front cleat with a long enough line for the bag to be in front of the riggers a few feet. Somewhere near the middle of the boat. Then I have a second line that's longer tied to the small end of the bag for retrieval. It's left with a little slack and just tied loosely to the railing. With two bags, same thing just one on each side.
-
Animal control?
-
If you're ever in Henrietta and we can hook up I'll take the reels and 2 rods to go with them.
-
A bike rack by the dock would be nice...
-
I hope you don't mind but I had questions about Sandy as well. I've only ever launched out of the Rochester city boat launch, but I'm thinking about heading out west a bit for a different scene since it seems like the fish are moving in from that direction. Plus that long slow run out of the Genny pier is annoying.
Cost to launch? Anything unique I need to be aware of (hazards, etc)? Is it busy? Do I need to get there early for a spot to park? What channel is everyone on?
-
You can always bump up the rpm a little on the engine. Nothing says you have to run right at idle.
-
Gasoline with ethanol will actually keep better longer the alcohol helps the gas from turning into varnish. But the trade off is with carbs that don't have ethanol safe gaskets they will be dissolved by the alcohol.
Uh....this is not my understanding at all. Look up "phase separation".
-
Was thinking the gander rods, maybe the daiwa rods too. not worth it to ship though. Thanks anyway.Not really. What are you interested in?
Sent from my SM-N920P using Lake Ontario United mobile app
-
Ever get out to Rochester?
-
Definitely don't assume a brand new hook is sharp. I've seen them come razor sharp (not many) and I've seen them dull as a garden tool. Most are somewhere in between.
-
Yep 126 on rigger... Wanted close or on bottom where the hooks were. It worked just fine. Stir up the silt to trigger a strike.
Sent from my HTC6525LVW using Lake Ontario United mobile app
Ah...ok. That makes sense. Thanks for the clarification.
-
... down 126 ft over 122 ft.
Wait...wouldn't that put you in the mud? Or have I been reading these numbers wrong all along? ....that might explain some things.
-
Excellent weekend especially for being on new water. Well done.
Moor Sub Troll display and Probe
in Classifieds - Buy, Sell, Trade or Rent
Posted
Three shiny nickels and a homemade apple pie.