King Fish

Members
  • Content count

    13
  • Joined

  • Last visited

About King Fish

  1. Jacked the boat up to the steel rafters so I can do the boat and trailer at the same time. Almost done sanding, then on to the PRIME. [emoji16] Sent from my iPhone using Lake Ontario United mobile app
  2. what do you guys think about this primer ? I've got most of the outside sanded and all of the inside done. Sent from my iPhone using Lake Ontario United mobile app
  3. Looks great, thanks again for the pictures This is where I'm at so far. This is the primer I'm going to use. Sent from my iPhone using Lake Ontario United mobile app
  4. All of the responses have been awesome, keep them coming. [emoji12] I started sanding yesterday and it's coming out pretty good. I completed the inside and I have about 1/2 of the outside done. I'm probably going to clean up the inside and prime it next so that I can go ahead and put the floor down. Any suggestions on a good inexpensive roll on primer? Sent from my iPhone using Lake Ontario United mobile app
  5. Did you apply a clear coat and what type of rustoleum did you use? Sent from my iPhone using Lake Ontario United
  6. Hi, so I am sanding with an orbital sander with 60 grit sandpaper. Do you think that is scuffing it up enough? Lastly what are you mr suggestions for clear coat. Rustoleum makes a clear but I wanted to know if anyone had tested it.
  7. Thankypu for your reply. I did not know that rustoleum had a marine version. I just picked up thier oil based professional gloss enamel from Home Depot. Some say it will work well some say it won't. Do you have any Suggestions ?
  8. Here what it looks like now Sent from my iPhone using Lake Ontario United mobile app
  9. I want to sand, prime and paint my 1982 Aluminum Sea Nymph. I want to use rustoleum primer and paint, Any suggestions??? Sent from my iPhone using Lake Ontario United mobile app
  10. I have begun to seal all my wood and I'm going to put the bottom floor down, sand prime and paint the inside then remove the engine and flip the boat to paint it. Also are the any recommendations on flipping the boat? Sent from my iPhone using Lake Ontario United
  11. Hi, and thanks for the reply. I am going to paint the inside the same as the outside because the inside is going to be carpeted. The pics below start with how it looked with all the old stuff down to where it is now. Sent from my iPhone using Lake Ontario United mobile app
  12. I have a 16 ft Sea Nymph that I have gutted to the stringers. I am wanting to paint it but I want some feed back first. I am thinking about sanding the old paint to roughen up the surface, then go over it with Self Etching Primer, them I'm planning on using Rustoleum Professional semi gloss white. Who out there has any suggestions. Thanks in advance Sent from my iPhone using Lake Ontario United mobile app
  13. Tiny Boat 82 Sea Nymph Restoration (help) Hi all, I'm new to the site and wanted to get some feedback on my project. I have a 1982 Sea Nymph Fishing Machine and am completely restoring the interior and paint. I decided to strip it down to the aluminum stringers. I have measured and cut the floor, now I'm sealing it with Spar Urethane, between 4-5 coats. I am trying to decide if and how to paint the boat because the paint is really ugly. I'd like to paint the boat a bright white and re-upholster the interior with tan carpet and do so for as little money as possible. The below pictures of my progress this far. Any suggestions are greatly appreciated. Thanks