Jump to content

dctaz37

Members
 View Profile  See their activity

  • Posts

    54

  • Joined

  • Last visited

 Content Type 

Everything posted by dctaz37

  1. dctaz37
    Looking for these 2 lures.
  2. dctaz37
    The gas cap on my auger has leaked from day one which is a real pain. I went to replace it and the cheapest I found is $40 with the shipping and taxes. Seems a bit much for a gas cap. Anyone know of a cheaper replacement, the part is 3033-fuel cap.
  3. dctaz37
    I didn't hear back regarding my question and I also send you a pm. Please advise.
  4. dctaz37
    Still looking...
  5. dctaz37
    Do you happen to have supply in Canada?
  6. dctaz37
    There isn't an email address on their site. I've filled out the contact us form at least twice and posted on their facebook page, no response.
  7. dctaz37
    I emailed them before and they do not carry the kit.
  8. dctaz37
    I'm looking for the walker kit to crimp on to down rigger cable for the auto stop. Over the years I've had to cut the cable shorter and now the length of cable from the crimp to the clinch is too short . Please advise if you carry this item or can point me in the right direction.
  9. dctaz37
    Anybody?
  10. dctaz37
    I picked up 2 walker down riggers with auto-shutoff and 2 tilt bases. One was a demo unit so new but missing the power cable but is the same style as the two on my boat. The second one is new in the box but the style is a lot different. It has an extra pulley block, bigger magnet and a protective steel flex tube over the last few feet of cable. My questions are : are the tilt bases worth installing? Advantages/disadvantages? Not sure on the new down rigger, anyone have experience with this style? Advantages + disadvantages? I've attached a photo.
  11. dctaz37
    Thanks.
  12. dctaz37
    Sorry for so many questions. Did you paint it on a flat surface or hanging vertically? Can you just confirm this is the correct stuff, I checked today and the lid doesn't look like it would seal very good after use. https://www.canadiantire.ca/en/pdp/plasti-dip-liquid-0482236p.html#srp Thanks.
  13. dctaz37
    Thanks, that looks solid. I'll try that once the heat shrink tubing wears off. I think the tubing I have shrinks 2 to 1 but just ordered some 3 to 1 but will buy some plasti dip, hopefully it goes on sale as $26 for one application is pricey.
  14. dctaz37
    Thanks I think CDN tire has the same stuff for around $26 a can. , did you do one coat or more?
  15. dctaz37
    The flexseal came in a can and I painted it one. Fisherdude, do you happen to have the brand name of the product you used and how you applies it? I took the clinchers off and put heat shrink tubing but the end is not tight on the cable so I don't think it is going to last.
  16. dctaz37
    Hello, have you tried this method before? If so, please describe the application. I bought some flex seal which I believe is the same stuff. I used the rigger for one trip and all the rubber is off. I looked at the instructions for Plasti Dip and it is described as peel able.
  17. dctaz37
    It looks like here in Canada it is only sold in an aerosol
  18. dctaz37
    I saw another post where they said to use liquid electrical tape, thoughts?
  19. dctaz37
    ???? Not sure what the link is for. The contact us doesn't work from that site.
  20. dctaz37
    Hello, I have the Walker down-riggers with the auto shut off. There are some metal pieces crimped on the cable and when they pass the sensor it stops the motor. These crimped on pieces were covered by heat shrink tubing and it is coming off. I don't know if the tubing is original or necessary. Would anyone have the answer for this?
  21. dctaz37
    My son some how broke the connector on the pole and pushed the pins into the base. I was able to fix the base but the plastic on the pole is damaged. Anyone know if you can get the plastic connector for the pole. It is an Attwood 912854 base is 91022 but is is probably a standard part.
  22. dctaz37
    still looking for the lure on the right.
  23. dctaz37
    Hello, we finished up fishing Friday and I took the cannonball off and the clip broke but I had the ball in hand. 10 minutes earlier and I would have lost the ball and my probe. Any idea where I would find another cannonball clip or what clip would be recommended as a replacement? I looked at Cannon Downrigger Weight Terminator kit but not sure. I also found a couple here at home that are big jon but not sure how they work or if they are recommended with a Walker Pro downrigger.
  24. dctaz37
    Okay thanks, I have a bunch of the plain. Oddly enough, the watermelon like lures have absolutely no paint on them but still catch fish while the plain lures I bought don't.
  25. dctaz37
    Thanks, keep me advised as to what you find.
×
×
  • Create New...