cnyh2ofowler

We fish fast in the Spring, 3 plus mph for salmon. So we fish straight spoons at these speeds. We will start with the ff once the thermocline sets up. Does not mean the ff won’t work early.

Thanks for the info. I have a 19 foot Lowe and am replacing a 2006 Johnson 8 hp that was belt driven it was loud and vibrated like crazy. We are planning to fish on Sunday or Monday so we will see how the new motor pushes the boat.

Just bought a Suzuki 9.9 for trolling. It came with the standard 3 blade prop. I see a lot of guys have the four blade props on their trolling motors. What is the advantage of these props for trolling? 

They run those thin fins in Michigan a lot for coho in reds and oranges. Thanks for the report, great day.

I run 10 foot medium heavy rods with twilly tips for my high divers and 8 foot medium heavy rods with twilly tips on my low divers. 

This winter I decided I would try and learn to be a better flasher/fly fisherman, there is some great content on YouTube and I have noticed the Michigan guys rig their dreamweaver flies backwards ( the skinny way) This must give the fly a much skinnier profile. Has anyone tried to run attomik or minion flies backwards? Has anyone had any success doing this.

We catch a lot of fish with the torpedo divers on the boards, run 4,8 and 12 oz. Not a exact science, we run them on 15 pound braid, if you watch the angle of the line, your depth is very speed dependent. We run them on our big boards, we start the outside rod at 60 feet, middle at 90, inside at 120. If one goes a couple of times we will run all three at that depth, typically the 60 will be good early and as the sun gets higher the fish move down and the deeper rods go better. This is before the thermocline sets up and the fish are spread throughout the water column.

For our fixed sliders, we just half hitch a rubber band around the down rigger cable, hook the slider snap around the line to the rod and through the rubber band, close the snap. When the fish hits, it breaks the rubber band, releases the rod and you are on. Once had a wicked hit on the rigger then nothing. Brought the rigger up and found I had snapped the cheater leader directly to the down rigger cable. Not much give there, spoon gone.

When running sliders or fixed cheaters I put a bead on my main line, above the swivel, 6 foot leader to my snap. This prevents the slider/cheater from sliding all the way to the swivel on my main line and puts both spoons about the same distance back. The swivel on the slider does not screw up the swivel on the main line and if you double on that rod, which happens, you can net both fish at the same time.

Fished Oswego Saturday afternoon, 100 to 220 feet of water. Ended up with 2 kings and a coho. They seem to be hard to come by this year. All 3 fish came on 11 inch, green dalmation pro trolls with bait. Can’t buy a fish on a flasher fly. Eggs seem to be real tight, might last a little longer this year.

I run 21 to 22 inch leaders on my 8 inch spinnys. Just picked up a few 10 inch spin doctors and was wondering what length you guys are running to your flies behind these 10 inchers?