jmyers8

I've used 7 ft diawa wilderness mh rods with wire and mag dipsys and have had no issues. I dont like long diver rods. My outside rods are 8 and 8.5

I have it and the towing Insurance. I lost a tranny line at the marina they came and picked up my truck and took it to a repair shop. For 120 a year I cant see why anyone wouldnt  

Last year in olcott we fished during all hours and had just of good of a bite mid day as evening and mornings 

Did you buy them all relatively at the same time? In erie we run 4 to 5 a side often, what I've found is older vs newer boards were manufactured at different times and run different. I have 1 or 2 on each side that run just a little out of line of the others. Also check the weights and foam on the back to make sure they are in the same spot and good shape

Have you checked out magnum metalz

Check out fined tuned welding on facebook. His welds are 2nd to none I have his trees and dual axis rod holders and love them. Hes local to me in ohio but ships anywhere. 

What about getting tracks that mount to each gimbal. That would give you a whole lot of room that could easily be taken off or rod holders moved around 

I run mine off a 6 inch track on the corners bolted down through a backing plate. I dont have any issues with 12 pound weights 

I have 6 suremount downrigger brackets that fit the crestliner gunnel track system or anywhere suremounts are applicable. 2 were used for down riggers and the other 4 were used as track mounts so they all have a few mounting holes in them. 

I'd like to sell in at least pairs of 2 for $50 for the pair and that I cludes shipping. If you would like all 6 it is 45 a piece and I will cover shipping. All work and function as they should. 

Theres been a few on market place in the port Clinton ohio area

This has sold

Guys here on erie run a jet 30 off a normal size walleye board 

I'll take 225 for the probe 

I'm wanting to upgrade to the new probe so hoping to sell my old one to help save some money. Only used a few weeks a year and I think about 2 years old. I'm located in ohio so I will cover shipping. I'm asking 250.00 that saves you 100 over the price of a new x4 probe. 

How about 80? Dont need it anymore

I have a veridian laser attachment for a smith and Wesson shield plus a reactor auto activate holster made to go with the laser. It was installed, sighted in, then never carried. No scratches or anything on the holster or laser. I just replaced the batteries in it to make sure it works and will also include the 2 extra that came with it. It has the original bag, paperwork and also allen key and screw for adjustment. Originally 120 new I will sell with shipping included for $100.00

That's all thats pretty much used on lake erie with good success. 

I run a 7 8 and 8.5 for walleye and 7 and 8.5 for salmon out of a 21ft boat

Sorry this was sold yesterday. 

bought a new knife before this one arrived for an upcoming trip. This is brand new unopened. Comes with case and 4 sets of blades. Retails for 130 to 150. 115 and that will include shipping in the US.

Ohio to olcott well be there Monday afternoon

Seeing if anyone has a 400 copper or weighted steel they would like to part with. Well be in olcott Monday I'd like to meet there or along the way. 

I'll take lot 2 I'll pm you. 

1 hour ago, TriMatt307 said:

4 river setup is in play. I’m planning to run mag divers on 1 setting (deep) and #1 divers on 3 setting. I use 30 lb torpedo 7-strand wire so I should be in good shape. Thanks for the advice and the YouTube videos have been very helpful on getting going in the west. 

That will get you running and not have any issues that's what I run and cant say weve had any problems. I've ran 4 divers 2 riggers and 2 board lines also. Just have to make sure your boards get out a ways and make slow wide turns. 

I would look at using a Sam's pro release if it will connect to the front of a church board. The offshore mags have no problem with a 300 copper