saeva307

Congrats on winning the cup!! Must be an awesome feeling!!! Nice job! Sent from my DROID RAZR using Lake Ontario United mobile app

The molds and rights were sold. Baha Cruiser LLC is being built in Cross City, FL (about 40 miles from the old facility). The new owner is Mr. Roy Skinner.

Thanks for the help guys. I'll be looking into the teleflex system. Looking to put autopilot on the boat so that is why I would like to upgrade the steering system.

Hi All, I've been doing alot of work on my boat and was thinking maybe its time to upgrade to hydraulic steering. I have a 27' Baha Cruiser with twin inboard engines. Is it worth the upgrade? Which hydraulic steering kit is for inboards and which one would you recommend? Thank you for all the help, Pete

Sold pending payment

For sale is a Raymarine C80 sonar with the dsm 250. In good condition and works good. Unit was flush mounted. Does not include transducer. Asking $700 OBO

Hi all, I have a 26' baha and I believe the stringers are bad. I was wondering if anyone knows of a place in the point breeze,ny area that can replace the stringers? I would have the engines and gas tanks already out and it would be ready to be worked on. Just looking to have it done right. Thanks for the help! [ Post made via Android ]

Sounds like it would be alot of fun! [ Post made via Android ]

Yes still available [ Post made via Android ]

Bump. $500.00 OBO [ Post made via Android ]

Pair of Lee's Tackle wishbone style Jr. Holders. 18"long main tube. $600.00 OBO Thanks. [ Post made via Android ]

Bump. Need to get it out of the garage. Make an offer. [ Post made via Android ]

Here's an update on the engine. I talked to the guy at the engine shop and he did a leak down test on the block to see if it was cracked. Block was good. Then he did a compression test and found one cylinder really bad. He also tested the heads. They were good. After he disassembled the engine he found in that bad cylinder broken rings on the piston. He said that with such low compression in that one cylinder it was sucking water back in from the exhaust and going into the oil pan which caused the milky oil. [ Post made via Android ]

Bump. Make an offer. [ Post made via Android ]

So I talked to the marina and they are saying the rings are stuck and all that "pancake batter" is caused by blow by. I told them I don't think so and they said they will pull it out and take it to an engine shop and see what they say. So we will see what happens hopefully get the boat back in the water soon. Thanks for all the help! [ Post made via Android ]

Bump. [ Post made via Android ]

Thanks for all the help! I'm going to contact the marina today and see what they say. They winterized the engines. [ Post made via Android ]

Yes oil looks almost the same color. [ Post made via Android ]

Just put the boat in for the season and took it out for a shake down. Everything was going good until I smelled something like exhaust fumes in the engine compartment. So I opened the hatch to check everything and saw some smoke and something like milky oil coming out of the valve cover vent tubes have no idea what could cause this??? Please help!! Its a 305 volvo penta inboard starboard engine. Thanks for the help!! Pete

Bump [ Post made via Android ]

Trying the heat gun it works just takes awhile and leaves that sticky residue behind. I'll try cleaning with wd-40. Thanks for the help! [ Post made via Android ]

Looking for the best/easiest way to remove the vinyl strip from my fiberglass hull? Thanks for the help! [ Post made via Android ]

Bump [ Post made via Android ]

Bump [ Post made via Android ]

Bump [ Post made via Android ]