Jump to content

Billy Bones

Members
  • Posts

    36
  • Joined

  • Last visited

Everything posted by Billy Bones

  1. Hi Ya David Wouldn't be brown trout time without a report from you and Laker John. Monday looks like a decent day so far, might make the run down and give it a shot. Nice to get out and blow the stink off!! Billy Bones
  2. Exactly the same fish, the males do color for spawning but not a different species or strain. They're all brown trout. Billy Bones
  3. Will trade for 16 foot Aluminium Boat, Motor, and Trailer of equal value SOLD 1987 Starcraft 18 foot Aluminum, with Johnson 110hp Outboard set up for salmon fishing New power head and a new prop, last year. This boat has new throttle cables and a new marine plywood floor. There is a full stand up canvas canopy included, that needs a repair. Also has plastic side windows. Water pump was replaced last year, also new set of spark plug wires. Boat does 40 mph on GPS. The trailer is galvanized and is oversized for the boat, and in great shape, with new rollers, two new tires and rims, new spare, with mounting bracket, new winch, new hitch/receiver (2 inch), and a new kick stand. Also has bearing buddies. All these parts were put on last year. I have docs for the trailer. A trailer like this would be worth over $ 2000.00. Comes With 8 hp Evinrude Outboard Motor Fulton Outboard Motor Bracket (good to 20 hp.) Lowrance X 96 Sonar-Fish Finder and two Scotty rod holders. Two fold down sleeper seats, and two jumper seats for the rear, in perfect shape, no tears or cracking. Built in gas tank Also included are all accessories, anchor, lines, flares, first aid kit and some PFD's. Interior sides have also been replaced with treated plywood and covered with indoor/outdoor carpet. Done this year 2009. The top is in need of repair or replacement. Storage boxes in the open bow need to be replaced and covered with indoor/outdoor carpet. All old wood has been removed. Two Cannon Electric Downriggers Mag 10 with telescopic booms that can extend to 53 inches. (with auto stop and positive ion). Trolling board with aluminium pedestals. $ 4500.00 without the downriggers and kicker. $ 5500.00 with the downriggers and kicker.
  4. Hey Todd looks like you're having a great time. Billy Bones
  5. 1987 Starcraft 18 foot Aluminum, with Johnson 110hp Outboard SOLD New power head and a new prop, last year. This boat has new throttle cables and a new marine plywood floor. There is a full stand up canvas canopy included, that needs a repair. Also has plastic side windows. Water pump was replaced last year, also new set of spark plug wires. Boat does 40 mph on GPS. The trailer is galvanized and is oversized for the boat, and in great shape, with new rollers, two new tires and rims, new spare, with mounting bracket, new winch, new hitch/receiver (2 inch), and a new kick stand. Also has bearing buddies. All these parts were put on last year. I have docs for the trailer. A trailer like this would be worth over $ 2000.00. Comes With Fulton Outboard Motor Bracket (good to 20 hp.) Lowrance X 96 Sonar-Fish Finder and two Scotty rod holders. Two fold down sleeper seats, and two jumper seats for the rear, in perfect shape, no tears or cracking. Built in gas tank Also included are all accessories, anchor, lines, flares, first aid kit and some PFD's. Interior sides have also been replaced with treated plywood and covered with indoor/outdoor carpet. Done this year 2009. The top is in need of repair or replacement. Storage boxes in the open bow need to be replaced and covered with indoor/outdoor carpet. All old wood has been removed. Two Cannon Electric Downriggers Mag 10 with telescopic booms that can extend to 53 inches. (with auto stop and positive ion). 8 hp. Evinrude outboard. Trolling board with aluminium pedestals. Would be willing to take a 16 foot aluminium fishing boat, motor and trailer package as trade or partial payment. No motorcycles or skidoos please. $6000.00 Canadian $ 5000.00 without the downriggers.
  6. Have been running flea flicker 20 lb. since early July. No Problems at all. Billy Bones
  7. Give it a few weeks and you will be able to catch some of the Kings when they start their spawning run. There's always shore fishing available, just don't know much about it. Check with your local tackle store, sure that they would be able to point you in the right direction. I'm not from your area, but I fish the Eastern Basin of Lake Ontario all summer. You don't need $ 15,000 to enjoy fishing, key word is enjoy!! Billy Bones
  8. Got out of Stony Creek on Tuesday with No. 2 Grandson Brenden. Launched at 11 AM and stayed out until 5 PM. Ended up with 6 boated out of 9 hits. 145 to 175 FOW riggers at 95 to 110 feet. Got two mature Kings and four Rainbows off sliders. Kings were 18 and 22 lbs., Rainbows were 5 to 8 lbs. Lure that worked on the Kings was NK Mags black with purple tape and a white underside. Rainbows taken on NK Watermelon. Best screen in 155 FOW. Brenden caught his first King (18 lbs.), for the first 5 minutes of the fight, he just had a stunned look on his face. Wasn't sure whether he was playing the fish or the fish was playing him. He would gain 20 feet of line, only to lose 50 feet. With a little coaching from his old Grandpa he settled down and did a great job. He's Hooked, Wants More!! Fantastic day spent with a great kid. Will be back at it on Tuesday to Thursday. Might try Oswego or Fair Haven (any suggestions)? I am a Canadian, what are the weather channels down by Oswego? Billy Bones
  9. What's the best place to launch to fish the Scotch Bonnet. Brighton or Wellington? Or is there another ramp any closer to the shoal than these two. Billy Bones
  10. Was out yesterday, Friday. West and South of the green can, trolled over to toward Pchyche Shoal. Picked up two salmon 10 to 12 lb. and three small lakers. All fish hugging the bottom. Got the Salmon off spin doctors and flies, Lakers came off NK 28 Watermelon. Total, 7 hits, 5 boated. Sorry no pics, was alone. Fleas were bad, respooled a couple of rods with 20 lb. flea flicker line by Cortland. This stuff works well, just a gum ball size glob at the knot. Billy Bones
  11. Any salmon starting to show at Wellington yet? Thanks Billy Bones
  12. Nice fish Todd will have to get together on my next trip down. Billy Bones
  13. To all that volunteered time and effort. WELL DONE! Billy Bones
  14. Will be down in Oswego or Henderson, Monday and Tuesday. Are the fleas bad yet? Thanks Billy Bones
  15. Sounds like tough fishing Todd!!! But at least you have the option to find calmer water in that area. Billy Bones
  16. Well done Todd, look forward to more reports from Henderson area. Will be down on Tuesday. Billy Bones
  17. Hey Guys This might be a dumb question, but have been taught, if you don't know, ASK!! Have set up a couple of large planer boards on my boat. Can you run dipsy's off the boards? If so what size and kind of release do I need? Or is it better to just use weights? Thanks Billy Bones
  18. Hey Todd I might take a run down to Henderson Harbour during the week. We retired old farts can do that. Would like to take a few Lakers. Any suggestions? Billy Bones
  19. Hey Todd don't know if you sent your phone number via PM. Was also out on Wednesday, went east from the launch. I have an 18 foot beige coloured Starcraft with a brown top and Cannons mounted on a trolling board, maybe you saw me out there. Stayed in 8 to 15 feet of water, went 7 for 10, 5 Browns, 1 Coho, and what I think was a very small Atlantic. No size, biggest was a 5 lb. brown. Got them all off some old Marathon (frog coloured spoons) I used to use in Lake Michigan years ago. The ones with a couple of rattlers at the back. Will be down again in a couple of weeks, maybe we can get together then. Went out to deeper water to see if I could locate some lakers, marked some fish, but no takers. You were right about the ramp at Mexico, easy in and out. Thanks for the info. Billy Bones from Ottawa
  20. Hey Guys Been lurking and gleaning info off the board for the past few weeks. Have decided to make a trip and get in on the fun. Will be down Wednesday to Friday of next week and launch out of Mexico Bay, the ramp just east of Hickory Grove. Is there a launch fee there? Will also need a non-resident license, is there a place to pick one up in that area? Will be staying in Pulaski, so if there is a place that carries licenses there, it would be great. I used to fish salmon and trout out of Waukegan IL years ago, and decided to get back into it, since I now have more time. This is a recon trip for me, just recently retired and will be alone on this trip. If anyone wants to join me, send a PM. I have an 18 foot Starcraft (nice big water boat) Planning to spend a lot of time down there this summer. Thanks Billy Bones
  21. Hey guys, have been stalking the board for a few weeks and have decided to give the browns a try. Have heard a lot of talk about the water having good color. I take this to mean that the water is cloudy or stained as ooposed to clear. If I'm wrong can somebody correct me please. Thanks Billy Bones
  22. Don't know that Landshark, I am a Canadian. Good luck on Quinte. They are starting to catch a few walleye around Cressy Point and Prinyers Cove. I was there a few days ago and got only three on purple a perch reef runners. No big girls yet. Billy Bones
  23. If the Ontario Government would get their heads out from up their a$$, they might come to realize the revenue generated by sport fisherman. Also the facilities for launching boats on the North shore is ridiculous. I have fished both the north shore from Darlington to Wellington, and the south shore from Henderson to Oswego. The facilities on the south shore are second to non, love the ramp at Oswego. The north shore facilities are a joke. Would rather fish the south shore anytime over the north shore, but with the hassle crossing the border in this day and age, it's just not worth it. Have been stopped by Canadian customs and had my boat searched 3 out of 4 times. Guess they think I am some sort of smuggler. Sorry about the venting, but this is a touchy topic and one that just makes me do a slow burn. Billy Bones :evil: :evil:
×
×
  • Create New...