Whacker

If you have a boat with flush mount rod holders and find them of no use except for putting a rod in while running to your spot. I have a holder that drops in and locks in the gimbal pin, so you can use it for your dipseys or to widen a flatlining spread. They come in two models, a basic "T" that puts your rod straight out at a 90° over the water, and a model that has a 15° upward angle and a ring to attach a safety lanyard. Both are made of 1/8" thick aluminum tubing, are lined with a PVC tube to further protect your rod, and powder coated with epoxy paint to give you a long lasting finish. To see pricing and pictures click on my link below. https://www.1lastcastlures.com/reel-safe-rod-holder.html Sent from my moto g(6) using Lake Ontario United mobile app

Nice job. Just out of couriousity, are you using a jigging outfit that you would use for saltwater butterfly jigging with metered braid? Just wondering because I have 4 for yellowfin tuna, but they would definitely be a little on the heavy side for Kings.

2 Daiwa SS1300 Spinning Reels. Used but in very good condition. These are Mid 90's Models made in Japan not in Taiwan. $80 each plus shipping from Syracuse NY

I have two Daiwa SS700 reels for sale. Used very little and in excellent condition. $50 each Firm Sent from my XT1254 using Lake Ontario United mobile app

I agree with Laker Taker. Sent from my XT1254 using Lake Ontario United mobile app

Small gas stove for sale. 4 burner, 21" wide. Would make a good hunting camp or efficiency apartment stove. Was already in my basement when I bought my house in 87' and I have never used it. Asking $200 or best reasonable offer. I live in the Eastwood section of Syracuse. Sent from my XT1254 using Lake Ontario United mobile app

No, sold it. I believe it was sammy dog that bought it. He works at an insurance company here in Syracuse. Sent from my XT1254 using Lake Ontario United mobile app

No problem, I totally understand. Sent from my XT1254 using Lake Ontario United mobile app

Yes, I still have it. Only the one. Syracuse NY Sent from my XT1254 using Lake Ontario United mobile app

Sent from my XT1254 using Lake Ontario United mobile app

SOLD ! Sent from my XT1254 using Lake Ontario United mobile app

I can't find the PM. I'm just not use to selling on this site. Sent from my XT1254 using Lake Ontario United mobile app

Syracuse (Eastwood) Sent from my XT1254 using Lake Ontario United mobile app

Yes Sent from my XT1254 using Lake Ontario United mobile app

Set of collapsible planner boards. $60 Sent from my XT1254 using Lake Ontario United mobile app

Ed I thought you moved back to wash. St. I sent you an email a while back. Did not hear back from you. Call me 315-558-9010 Mike Sent from my C811 4G using Lake Ontario United mobile app

I have gone out of Oswego in my 14 ft. But I have a marine radio and make contact with guys I know out there. Just in case something happens. Sent from my C811 4G using Lake Ontario United mobile app

I'm setting up my new boat and picked up a dual planner mast and now i'm debateting on which way to go. I have noticed over the past several years alot of tree or vertical rod holders on the market. I can see where you would pick up alot of valuble gunwhale space. but is there a functional superiority over the horizonal setups or is it just the space savings ?

I have posted in the classifieds a set of 4 SHIMANO BM50 REELS. These have been discontinued for about 20 years but were considered the best musky reel for csting or trolling. I posted them last week along with 8 DIAWA MILLIONAIRE II REELS for my friend. it is titled "SHIMANO/DIAWA CASTING/TROLLING REELS"

4 SHIMANO BM50 REELS 320 YD. 12#. SET OF 4 $300.00 7 DIAWA M35 and 1 M37 MILLIONAIRE II REELS. M35's have 260YDS 12# and M37 has 310YDS 14# CAPACITY SET OF 8 $400.00 I'm posting this ad fo my buddy who is without a computer at the present time. His name is Nick and can be contacted on his cell at 315-409-9505. Please, serious inquiries only. I was not able to put in the picture but he will be able to send them via cell phone.

Fished out of mexico pt. sunday. went 2 for 2, 1 14.5 lb. coho and 1 19.5 lb. king. 110 ft down over about 120 ft of water. on cutbait. was just off the east side of 9 mile point.

several trout openers in a row, me and my buddies caught 4 to 6 lb. walleyes in fall creek fishing for trout. I have never heard of any stocking program. I did talk to a couple of guys at T-Falls 2 years ago and they said flat lineing at millikin at night is good. anybody have any solid info ?

I have 11 of these brand new in the box. they will work on all Vex flashers: FL-8,18,12 and 20's. I was told they will also work on the vexilar predicessers, hondex,sitex,micronar. I just saw them in the reeds icefishing flyer for $109.00 and have seen them as high as $120.00. $75.00 ea. plus $10.00 shipping inside the U.S. (or deliver them if you are no more than 60 miles from Syracuse). Shipping to Canada add $15.00. I also have 3 S-Cables for the FL-8's to reduce the power for shallow water (under 20 ft.). $10.00 with purchase of transducer. $15.00 by itself. Plus $2.50 shipping. SORRY GUYS ALL THE ICEDUCERS ARE SOLD OUT. Still have the 3 S-Cables left.

Name: Mike Mansfield (Whacker) Location:Manlius,NY Home Port:trailer the boat Boat Name/Type:14 ft. mirrocraft w/15 hp Yamaha. Lowrance LCX28HD. no name at this time. I fish for:Trout,Salmon,Walleye,Perch. Just about anything. ================== Several of you charter captains mite remember me from when I ran the tackle dept. at the original dick's in heckinger plaza and martin's marine supply in mattydale. I also used to first mate for Jack Hamlin on the Reel Escape. Just wanted to say Hi, and hope every one and your family and friends have a nice Thanksgiving.