Jump to content

hookedupf7

Members
  • Posts

    1,029
  • Joined

  • Last visited

Everything posted by hookedupf7

  1. first it’s a 29 series battery. Damn fumble fingers. My thought is the only time I’m going to charge both batteries is when big engine is running. When trolling I can isolate to one battery. Still have main battery isolated to start big motor. Big motor is high output evinrude. It has 50 watts just for charging so that should charge both fine. I am kind of new at this so correct me please if I’m wrong!!!
  2. I gotta believe that would work. My whole house is solar powered. I am thinking one of the smaller setups because I’m running a 19 ft. Boat and don’t have that much room
  3. Just ordered perco switch and picked up biggest interstate battery I could get. It’s a 19 series. If I put switch in both won’t maine motor charge both batteries
  4. I see guys have talked about charging batteries with a solar panel rather than a kicker. It looks like a panel is putting out more than a kicker at idle. Any experience with this?
  5. Ok I was wondering if you could switch while running. Thanks for input.
  6. Talked to dealer today. I guess I’m going with biggest deep cycle and an isolator. He recommends that route.
  7. I am looking for 2 24 in mounting tracks and 2 12 inch tracks
  8. I was looking at them in bass pro. My thought was to hook riggers cb, xd and graph to one battery along with kicker. Biggest deep cycle battery I can get and charge it everytime before fishing. That way main battery for starting isn’t even in the equation. Buddy told me the new evinrude is real voltage sensitive. This way I am keeping away from that issue. Think it will work?
  9. Guys been working on my new boat rigging it. I see that it only has one battery in it . My plan is to put kicker with charge system on it . I am going to be running elec riggers graph marine radio, and fish hawk Xd. Should I add another battery to this setup and can I just wire it to other battery. The main motor is 115 etech.
  10. I think I am going to mount riggers solid. Then do rod holders in the tracks. Last thing I want to do is see rigger go deep six. Could make for a bad day!!!
  11. So fishy you don’t think any issues with riggers mounted on tracks
  12. hookedupf7

    Sold / Closed 162 angler smokercraft

    Just sold it yesterday
  13. I am looking for one 4x4 big Jon base plate and 2 Cannon blocks for mag 10 a riggers
  14. I am looking for a used kicker. 4 stroke only. 8 or 9.9 horse. Must have charging system. Any around?
  15. Will the cannons work in Bert’s track and visa versa. Thanks for all the input guys!!!!
  16. I doubt it is a salt water design . 8 horse Yamaha high thrust.
  17. Guy said it’s 25 in shaft. Im using adjustable kicker bracket. Do think that still be an issue?
  18. I got a chance to pick up a kicker that was on a sailboat in salt water. Motor looks real clean. The guy says low hours yay or nay guys??. Yamaha 8 horse for 800.
  19. Is anybody using a handheld vhf radio compared to hard wired one.Just wondering how range was and stuff.
  20. Checked it out what you get per spoon
  21. I may be interested in getting some older sooons redone. Do you have anymore paint schemes that you have done?
  22. I just took it all apart I thik I can make work. ThAnks for all the info guy. I can take big bolt out and either use that or use two smaller bolts
  23. I did have problems with it loosening. But now I took it a part it looks to have a set screw off to the side. I’m gonna see tommorow if I can get apart more tomorrow. Getting ready rig my new boat. I’m trying to cut corners and save where I can. I have 3 of these holders. Might not be worth fighting with them though
  24. I could go shorter if I could find an adapter that has hole big enough
  25. Through bolt. It does look like there is supposed to be a pin
×
×
  • Create New...