Jump to content

Sk8man

Professional
  • Posts

    13,810
  • Joined

  • Last visited

Posts posted by Sk8man

  1. The above video from 2009 is just about as funny and is more like a "caricature" depiction of the process. Well intentioned and there probably isn't much out there in the way of videos but serious copper folks would have some concerns about the thoroughness of the description of the actual process when done right including the hand motions and various specifics of the technique etc.

  2. The Whaler is probably the safest boat but the Parker is in a class all by itself and it would be my choice out of all of them. They hold up well, have a lot of open space in the back, cut through the water beautifully, have a first class cabin/hardtop and on and on. On the downside they are expensive and you seldom see used ones for sale:smile: For 20-30 grand you'd probably be looking at one with some age. I wouldn't worry about the hull on either the Whaler or the Parker but older engines are the question mark.

  3. Glenn as I mentioned in my earlier post if you select the right 9.8 or 9 (one without all the frills but electric start) it may be about 90 lbs. Obviously you are free to do whatever you wish but in my own experience at least it could be a mistake getting a lower horsepower motor. Even on my 13 ft Whaler I initially had a 4 hp Evinrude and found that it was insufficient to get me back in when the high wind/waves came up. Most emergency uses happen when you least expect it so selection with that in mind you may wish to reconsider rather than being sorry later and having to get a larger kicker as I did. My 9.8 electric start Tohatsu weighs about 90 lbs. and will push my 3500 lb boat about 8 mph full tilt with more torque than my old two stroke 9.9 had Getting the right (sturdy) bracket and right length shaft are critical to performance however. By the way I use an electric trolling motor extension handle on the kicker to control the throttle and to make occasional adjustments to steering which I do with the main 135 hp motor because I sometime fish solo and don't use an autopilot. I am also able to steer with my main motor without a connection rod most of the time.

  4. I have recently had a similar problem with my Seastar hydraulic system when not trolling and underway at speed. I will  be interested in any info folks might shed on the problem. I do think the little fin on the underside of the motor lower unit may to be adjusted or re-positioned sometimes so that MAY have something to do with it but I'm nor sure.

×
×
  • Create New...