nhjim

nice job. that young guy is an animal putting it right to them awesome to see.

rubber bumper stays on to protect the prongs that stick out the front. remove at end of day otherwise water held inside will keep probe on and flatten your battery's.

got my weight today thanks a lot they look great. jim

new company? something your making yourself? parts warranty on these in future.looking for downrigger swivel base. how many locking positions. thanks

keeping them busy nice job.

seemed to be yes i went toward the wider side of the range for my boat because the top got wider if that makes sense. meaning could have gone one range narrower with my boat width.

being universal some fitting required but pretty minor.

awesome thanks for posting

just bought a cheep one from oceans south online 6' 3 bow with rear support poles $115 shipped had it in 3 days. not nearly a custom but all told well made for the money. cheep shade.

On 7/6/2020 at 6:17 PM, Bnovoa3620 said:

Do you happen to know if they make dual rod holders for them?

fish 307 has them can either be boom mounted or they sell a spud that goes in the rear holder to attach the duals too.

when you run do you leave the ball on the hook or take off also do you leave them on the rail when trailering. no judging just curious why some are failing. the other guy that posted his base broke got me wondering the same. glad you were able to save it easier to send back for warranty. sucks about the rod though.

we get interference if running garmin fishfinder at 77 khz and fishhawk at i think there 55 khz. normally its the fishhawk that looses signal though. switch to 200 on the garmin everything works. just another thought.

big consideration also is if you want to network units together. the garmin 73 and 93 aren't net workable. belive the same with the helix series. they all make them that are just next jump up in price.

.

was getting ready to order one of those myself. now not so much.

this is a good example of what makes this site great. heres a member asks a ? that alot find obvious and everyone answered him seriously without heckling him. kudos to all.

prob swivel not spinning and line twist till it pops.

nice video  as always. thanks for posting

would you ship to nh and if so do you have the base for it. thanks jim

the key on my starcraft was lower left corner of the console always worried about it with my knee. finally pulled it and there was enough wire to move it up the dash about 10". glad you were able to get it going to make it in.

ill take them sending you a pm

i jb welded the lock nuts to the underside of the mounting plates also so could just hold the whole thing in there without worrying about dropping the nuts. they didnt like the shock of cordless impact driver but stayed put when tightening with hand tools.

when i mounted tracks on my starcraft it has rod lockers similar to yours. the inside of mine were just a real thin plastic. i carefully cut some hand size rectangles out of the top in 3 places. that gave me access to put the backing plates and nuts on my Cisco tracks.when done was able to just tape the cutouts back in with typar house wrap tape.unless laying on the floor looking up in its unnoticeable and tracks are on there to stay.

good video from traxtech on youtube about riveting them on. would think just depends how thick your gunnel material is.

10A rated for 10 lbs

thanks offshore we were going to come up for browns but will put it off for now. good luck to all