nhjim

i run 10A's with 10 lb balls and they pull them ok. a little slower than 8's but not bad 1 believe 10 lb is the max on these per cannon.

sorry for the loss. as a part time fire fighter see the results first hand and is truly devastating. hope you get things replaced before winter and good luck with the stripped down version.

bump for a good boat

pm sent thank you on the rise.

one of my cannon 10a riggers recently decided to not stop when coming up. down fine auto stop works just cant stop it with switch on way up anywhere in between. changed the switch out still the same.assuming must be the board but wondering if anyone had same prob before. rather not just keep throwing parts and hopeing. thanks jim

bunk trailer too

thats a bad day. id say panther should get get a nice pic of that for there wall of shame.

thanks for the input guys.

have one of there 8' reg guides set up with braid very happy so far.seems well built and not a $30 tree trunk.

did you ask the wife for it back first? sorry. think it fell off or someone borrow it on you.  never heard of that.

hear alot about the twili tips for wire do you prefer the roller tip.would be getting new taloras anyway so could go either way. thanks for the input everyone.

currently running only 1 braid diver rod off each side of the boat. thinking of adding wire divers am wondering what length rod s everyone runs was thinking of 7' wire rod inside on  a1or 2 set with the braid on a10'  rod on 3 or 4 set. my main concern is clearing rigger rods on a turn we run 2 riggers 45 degrees off rear corners. thanks jim

is there a shortage of carpenters up that way i should quit and move aug  trip seems too far off. unreal!

$10 fish usa just shipped mine

if there old like 10a's 10lb max they may do 13's for awhile but wont last.sounds like a motor issue. look back thru a ton of info on old posts here

was looking around the other day walmart of all places had some real inexpensive ones online. sure your getting what you pay for but cheep shade is good.

youll love it there after you come down drygulch rd that hasent seen a grade job for the past 5 years youll arive at the camp the first word that came to mind was deliverance. if you arrive in the am the owner will be out on a charter which means his wife will give you the run around about which dock you may use the one with 2, 3, or 4 pc of rebar sticking out the side. if your lucky youll get to tie up next to the gut boat. you can turn around in front of the launch of course anywhere else is easier because the kids can push off the bank front and back at the same time to help. ideling in and out is def a good idea so you dont fill the water jacket full of silt big rock pile on the right as you exit mouth of river and be very careful coming in with a following sea because tend to hit bottom when its only 3' deep and you have 3 footers. ow yea and would def clean your fish on the lake and not at there "fish cleaning station" if you plan on eating them. that being said we were smart enough to stay there 3 times before we found another rental and its hard to beat the location to the fishing if targeting the plant.

have the garmin 7" on my boat happy starting into season 2. there transducer is 77 or 200 to run on 77 with fishhawk will need them on oposite sides of boat.

looks like a fish hawk in the middle they run at 70 khz what little i know about it if they operate within about 20 khz of each other they need better seperation. would just check what your others are running at. i had a hummingbird that ran at 77 khz that i cant mount because of this. the garmin i have now is selectable 77 or 200 so just run on 200. hope this helps.

wondering what max depth on this is and what khz transducer is. looking for 1 for depth to mount back at riggers but couldnt find info online on this one. thanks

used to bowfish carp up that way. put in massena intake dam launch and fished around croil island. saw quite a few big muskies at night under the lights. but has been 3 yrs

reel only or talora come with

received today in as new condition thanks newmike 3 color leads they will be.

paypal sent for the 3

i had same prob with my frabill few years ago priced it out was 2/3 cost of a new unit. did pop rivet and patch with silicone made drag whole lot harder and broke right at edge of patch again. new house it is