Big Dave

What port , I don't know where the "Wall" is. All the background waves look like all the others that I have seen

You will like that fishfinder. With the gps you can change the plotter colors so you can follow the fish if you are out on the lake for a couple of days. My friend had one and we realy liked it.

Jeff (Miss-em) makes a awsome dipsie rod 7' one piece with single foot roller guides. Its action isn't as stiff as the other rods. Works great with the Kings and the smaller landlocks and lakers in the fingerlakes. I run them with 30# wire and Daiwa sg47 linecounters.

Sounds like a bad case of "Salmonella fever " to me!! Welcome to the sickward

I can't make this one this year But good luck to all

And Fishstix ,I hope your "catch rate "matches your" release rate" that you had last weekend Met Cosigner today

Good Luck to all the guys fishing it, should be a good one

ME!!!!!! and the fishfinder with gps

30# wire with a #1 dipsie. Roller guide rod for me.

Stix no replie! You guys have been keeping me going. Haven't had a chance to get the boat out yet. Selling my house and the tennet house , and remodeling the new to us house. Waiting for the closing on the hole mess and I am gone fishing Sold to Tim Horton's so you will have a new donut stop when you come through town

Catfish is 2/3 of the way from the boatlaunch at Mex. Pt. and 9Mi. Pt. Just east of scribia. Before the highrocks, bluffs. I am not sure what they are calling the silo.

Where are you located I would like to take a look at them?

Colorado :roll: That must be a Coors belly on that one stix

Were you using scent? The fish might be interested, but if they don't smell right they may turn away . Gas , tobbacco, soaps etc. won't get you bit!!

Any trailer has to be adjusted for the hull. It has to support the boat at the correct spots and helps to center the boat on to the trailer. Mine is pretty good the boat winds up in the same spot every time. I didn't do the adjusting. You don't want the bunk or rollers to set on a unsupported section of the hull. Mine is a roller with two short bunks that wind up under the I/O engine mounts of the hull. An easyloader brand. Just giving you more to think about

You can get the parts at NAPA. Make sure the alinement is true, and that the transom isn't getting soft and allowing the out drive to move around. Its not a bad job if you have a engine hoist. lots easier than a car engine. Get spilne grease and make sure that the splines arn't worn out on the drive shaft. The wiring unplugs, the rubber boots for the exaust slip off. And out it comes . Mine is raw water cooled no antifreeze to drain. Good luck!!

Put a new battery in your easy button!!! Good luck to you and the rest. See ya in Owsego

Those salmon hate flashers and flies off wire dipsies I wouldn't use them Two dipsies and two riggers with spoons & sliders have always been good to me at that end of the lake. Hope to get out soon. sold my house and fixing up the new one so we can move has me tied down right now. Have one of those spoons in an orange flavor too.

The 5" renosky stickbaits in the mirrior image and the reef runners, big rapala's all take fish for us. We take the front treble off, and some take all but the last hook off.

Check the LOC leader board, wire & e-chip.

Congratulations !! I just saw that Your boat is at the top of the leader board at 7pm. Nice job!

I would like to get a cut on selling Bill Dance new rods.

Any welder can fix or make a new one . Two smaller hose clamps can be hooked together to make a bigger clamp. The quick coupler is an airline coupler.

I came back from Albany on Mothers day May 7 one year in 8" of snow on my motorcycle. I think they ought to take the calander and move the dates around the leap years adding an extra day have gotten things a month out of wack

Talked to Steve at the NK sale friday. Said he had an Ice Fishing charter comming up next week

A batt. Isolator will let both batt. charge with out moving the switch.

What the heck all the slots are empty!!!!!!!