Jump to content

Sk8man

Professional
  • Posts

    13,807
  • Joined

  • Last visited

Posts posted by Sk8man

  1. The only thing I'd add to what Tim said about the wire knot is that I take a hot glue gun with clear glue and use a small amount on the knot on the trim tag where it meets the wire and it prevents catching on things (such as your finger etc.)and possiblly fraying (strand separation)or coming loose.

  2. I would definitely go with 150 lb. stainless steel downrigger cable but you need to carefully use the RIGHT DIAMETER CRIMP on it and crimp it correctly so there is no "wiggle" of the wire in the crimp. I have had the same SS wire on my downriggers since the mid 1980's without a failure of any kind.

  3. Trebles often have the characteristic of the individual hooks working against each other in the fishes mouth when he is hooked such that in many cases it ends up being a weaker hookup (lose more fish) than with the single stainless steel siwash hooks designed for salmon and other large fish

  4. Nick,

    I was just messin with you when I said "Southender" bud...I too appreciate both ends and the middle as well Some of my favorite spots are out from Dresden too... and I hear ya about being close to the boat (and thelandlocks as well :>)....I'm close to my trailer but that's about it :>)

    Les

  5. I honestly don't think the color of the hook is a significant factor...it is primarily the action of the lure and perhaps the color or size of it. Although I have replaced all my flutter spoons and other spoons with single Mustad siwash SS salmon hooks, I have retained the original hooks on all my stickbaits to preserve the action of the lures which in some cases are highly sensitive to changes per se. (e.g. Rapalas). There may actually be an additional advantage to keeping on the original trebles as they are in most cases not as large nor as brittle as the stainess trebles and have a slight amount of "give" in them so that the hook doesn't pull out as easily (provided you don't HORSE) the fish) or tear the mouth of some fish (e.g. rainbows with delicate mouth structure). It is my belief that at least for the stickbaits it is not worth risking the change in action and unless you have a scale that weighs minute quantitative differences in hooks you can't be sure that won't happen.

  6. I've always used single Mustad Siwash salmon triple or five X stainless hooks (mostly 2/0 and 3/0) on all my lures except stick baits. Seldom lose any fish with them over the years and easier to sharpen if necessary, They come VERY sharp, VERY durable and never had any bends despite big chinooks manhandling them. They seem to snag less on grass in shallow water too. On the downside they are relatively expensive when you change out several hundred lures :) Luckily I've been able to do it over they years and bought them in hundred packs.

    post-145411-0-03967700-1362172141_thumb.jpg

  7. Fished Honeoye today (all day) from Trident marine. Be advised it is no longer possible to walk out there from Trident as of tonight . The ice near shore has been severely compromised (all broken up) by the bubbler near there and although there is about 5 inches out away from shore there is now no way to get to it from that location....today was it for the ice fishing for this season for me.

    Oh....and did I mention that I no longer have a cell phone? and.....that my Ice Armor suit saved my butt when I went in? Yup thats the kind of condition of the ice near the marina....

  8. Fished Honeoye today (all day) from Trident marine. Be advised it is no longer possible to walk out there from Trident as of tonight . The ice near shore has been severely compromised (all broken up) by the bubbler near there and although there is about 5 inches out away from shore there is now no way to get to it from that location....today was it for the ice fishing for this season for me.

  9. I have a 2 stroke 135 Merc Salt Water Optimax. I have stored it inside every year but this one because the place I stored it has been sold. A couple years ago I decided to put it away without winterizing it in the barn all covered up with custom canvas and a heavy duty mooring cover on it (including a motor cover). The next Spring when I went to use the boat for the first time it ran rough and seemed sluggish etc. I took it to the marina and had it checked and they found that the lower unit seal was shot and surmised that it was that water had gotten in from ice deposits during the winter. It cost me $600. This year I had it winterized and then the entire boat AND MOTOR including the prop hub shrink wrapped in very heavy duty plastic. I should also mention that the year I didn't have the winterization done I have a live well and I had to also replace the pump as well because of left over water in it during storage. I learned.... :)  Incidentally, they don't need to "fog" your motor anymore they run a little heavier mixture with marine stabilizer directly into the engine by-passing your lines and tank etc. I also run a lot of marine triple strength stabilizer all year long in my tank (hoping to prevent moisture buildup...although I realize the jury is still out on whether it helps) I think the key to it might be making sure that the water is run out of the lower unit completely  when the boat is put away. Unless the lower unit fluid is changed when the boat is stored  then water in there might not be detected (you may already have a bad seal) and even covering the prop hub etc. may not be the answer come Spring and running the motor may cause MAJOR damage. Keeping the lower unit in the full downward position seems always a good idea as far as drainage. I know a lot of folks (including one of my fishing partners) don't believe in "winterizing" but based on the above I'm a firm believer :)

  10. You "Southenders" would probably get all snagged up on bottom up here :)  after all those years in the depths at the south end :lol:  Its always a toss up where to start out from year to year isn't it? My boat is so used to the northern half of the lake that I don't even need an autopilot....it already knows its way...

  11. I fished Honeoye yesterday and today and there was 7 1/4 inches in most places....and yes I did actually measure it :)  The near shore areas are  questionable in some spots and care needs to be taken there. Yesterday 30 large sunnys and gills, a keeper largemouth,  and a small pickerel all jigging. Today, a half dozen good sized gills and sunfish and nothing else. A lot of "lookers" both days (especially today though) but they wouldn't hit despite many changes of jigs, bait, line diameters rods/reels...you name it. It may have related to barometric pressure or something of that nature....

×
×
  • Create New...