Duck1

Bozeman bob, I agree I'm not paying 5000 for repairs. I will know a little more come Monday when I take it to amish welding shop and fabricators. I was thinking that if they could plate it, its possible it could last for years I'm hoping. Just looking for ideas before I move forward. Thanks to all that have responded . I have never had to deal with this type of issue so all the input is greatly appreciated. Sent from my SM-G950U1 using Lake Ontario United mobile app

Rolmops , thanks for reply. The anodes on both motors ( 150 and 9.9 kicker) the anodes are in great shape. There is no damage to the bottom of stern or anywhere else on the whole boat or motor's. All damage is in relation to the transom, it has damage on top cap of the transom also. I will check the ground on the motors. Thanks Sent from my SM-G950U1 using Lake Ontario United mobile app

Thanks tech2526, checking monday with welding shop on plating it . Talked to them this morning and they talked like they had worked on this problem before with other boats. Sent from my SM-G950U1 using Lake Ontario United mobile app

I filled it with steel putty sanded and used two part primer and painted with grey paint for now. Sent from my SM-G950U1 using Lake Ontario United mobile app

I repaired it today to get me by until I reach a decision. I have some pictures of before and after. Sent from my SM-G950U1 using Lake Ontario United mobile app

The transom wood is in great shape and I don't know if its treated wood. I read somewhere where lund had a similar issue, if that's true I don't know. The transom is fully enclosed so I can't see the wood other than where the corrosion has eat thru the aluminum and the wood looked good. Someone in the boats life has done repairs to the aluminum, filled in those spots , sanded and painted. It looks like a professional paint job until it started bubbling and now that's where my trouble began. Sent from my SM-G950U1 using Lake Ontario United mobile app

Thank you for replying. I have a amish welding shop near me and was thinking about going that route. I'm looking at all options and hoping people respond for those ideas. Thanks again Sent from my SM-G950U1 using Lake Ontario United mobile app

Looking for some help and advice. I have a 2001 sylvan navigator 19 foot, the aluminum skin on the stren is deteriorated where its needing to be replaced, thinking the transom wood had reaction to the aluminum. My question is, does anyone one know of someone that does this type of work? I live in Ohio and will drive to have it replaced. Any help would be appreciated. Sent from my SM-G950U1 using Lake Ontario United mobile app

SOLD SOLD SOLD SOLD SOLD SOLDI have cabela's Dmg20 has boat rash and a dawia 47lc accudepth plus . I don't know what pound test is on them , they both work as they should, 60.00 dollars for both shipping included, lower 48 only Sent from my SAMSUNG-SM-G900A using Lake Ontario United mobile app

Sent you a private message Sent from my SAMSUNG-SM-G900A using Lake Ontario United mobile app

Are they both the same size and make Sent from my SAMSUNG-SM-G900A using Lake Ontario United mobile app

Is there any tares in cast net ? Which net in picture? Sent from my SAMSUNG-SM-G900A using Lake Ontario United mobile app

Pm sent Sent from my SAMSUNG-SM-G900A using Lake Ontario United mobile app

Pm sent Sent from my SAMSUNG-SM-G900A using Lake Ontario United mobile app