Jump to content

carhartt123

Members
  • Posts

    52
  • Joined

  • Last visited

Everything posted by carhartt123

  1. Craig I'm in a similar situation as you. This was my first year running the lake in my own boat. I have an 18' starcraft and experienced getting blown off the lake my second day on the water. Even though this is my first year running the boat I have been here for years, fished many times with friends, and taken a lot of charters. The information I gained on those trips was invaluable but putting that information into practice on my own has been something totally different. All my time on the water this year was really learned what not to do more then anything but did finally manage one nice coho. Best thing I can say is keep it as simple as possible. Go in with a plan. Even write down the plan anf be as detailed as possible down to what lure on what rod. My first two trips I went with a general idea of what I wanted to do and ended up fumbling around for the first hour on the water. I now believe the process is more important than the lures in the water. A good amount of the information to get rigged up right can be found digging around on this site. Keep at it and the fish will come. Charters are a great learning experience and could be valuable at any point even years from now you never know what you could pick up. Another thing to watch for is guys on here with an open seat for a day. Good luck out there Sent from my SM-G950U using Lake Ontario United mobile app
  2. Pap eventually I will end up with some torpedoes. I have seen a bunch of great stuff on here about the ones made by the guys on the site. I guess the answer to your question would be that sometimes I just help tinkering with things when I have unused stuff laying around that I can repurpose into something else. Sent from my SM-G950U using Lake Ontario United mobile app
  3. I will. I lost a ball last weekend up in the trench so need to replace with something. I have a bunch of old pancake weights laying around in the garage so this will be a good winter project after hunting season. Sent from my SM-G950U using Lake Ontario United mobile app
  4. I thought about that. But if I put my release above it on the cable and attach to a good swivel not sure it would matter if it was spinning. Sent from my SM-G950U using Lake Ontario United mobile app
  5. Sorry was trying to figure out how to post a picture but I can't open the file with the instructions on my phone. Basically it is a copper, galvanized, or stainless pipe roughly 14" long 1.5" diameter filled with lead, and an eye hook on top. That set up should yield roughly a 10' weight give or take. From the little I can find on them they have very little blowback and work well near the bottom as they are harder to hang up. Sent from my SM-G950U using Lake Ontario United mobile app
  6. Has anyone ever tried a pipe style weight. They look to me as though they should work well. Especially for those times that I put the ball on the bottom either intentionally or unintentionally. Sent from my SM-G950U using Lake Ontario United mobile app
  7. Lots of options for how to do it. For the venison we slice into 1" cubes pack the jar with raw meat. You can season any way you want. Sometimes we leave plain maybe a little salt. We will use that for things like tacos. For a stew we add onion, garlic, and some bouillon. You need a pressure canner with the pressure gague on the top. We cook our meat at 15 lbs of pressure for 90 min then remove from heat and allow pressure to reduce on its own. You wind up with some of the most tender meat you will ever have. You can also cook the meat any way you like then add to the jar and follow the same process to seal the jar. Not sure for the fish but would imagine it is fairly similar. Sent from my SM-G950U using Lake Ontario United mobile app
  8. Trouthunter I can't speak for the fish but we have done just about any other meat you can think of. Just ate a jar of venison stew from 4 years ago tasted like the day I made it. Sent from my SM-G950U using Lake Ontario United mobile app
  9. Looks good Kevin. We do the same with our deer meat but I have never tried it with salmon. Sent from my SM-G950U using Lake Ontario United mobile app
  10. JTowne Friday is showing a N wind so my thought was the island might break some of that up. Who knows what it will actually look like by then though. Thank you Sent from my SM-G950U using Lake Ontario United mobile app
  11. Heading up to fish Friday and Saturday this week. I never fished the trench before but these are the last 2 days I have available for the year so I am determined to get on the lake. Weather looks pretty good for the weekend but Friday looks like it could get a little rough out of Oswego or Pulaski.I have an 18' aluminum so I thought going up to the trench might hide me from the wind a little. Will probably get there sometime mid morning. Thinking it might not be to crazy at that time even though we are coming into a holiday weekend. Is there anything to watch out for since this is a little tighter quarters then normal? I'm sure once I get there I will get a sense of where everyone is at. Is it easier to come out of stoney point? On the map it looks like that might be the case. Any advice is appreciated. Thanks Dave Sent from my SM-G950U using Lake Ontario United mobile app
  12. Well made it out Friday and Saturday. Got one small brown on Fri out of Oswego. We ran between 150 and 350 while getting used to the boat and the gear. Had a bunch of problems that day but mostly small stuff that was overlooked before hand. Went out of pine grove on Sat ran out to 150ft had a friend with another boat that day so a little more confident making the longer run. No fish on Saturday only had one release before we were tired of getting knocked around in the waves. Good learning experience. Figured out a lot of things that I shouldn't be doing, and one or two things that I should. Will give it another try here soon. Thanks again for the advice. Sent from my SM-G950U using Lake Ontario United mobile app
  13. Wow ok. I did not know anything was going on. I guess that will shift my launch. Possibly over to little sodus then same as before run north and troll east. If a big crowd of boats I may go west. sszoldra thanks for letting me know that would have been a heck of a surprise in the morning. Sent from my SM-G950U using Lake Ontario United mobile app
  14. So I think I have everything ready for the first trip. My set up will be 2 DR, 2 dipsey, and a lead core down the middle. I was able to pick up some lead core at a gander mtn for a good price but I can only fit 5 colors on the reel I had. I figured even if it is only down 30 ft at least it is another lure in the water and I have a better chance at a fish there then in the boat. I have limited tackle but I think enough to get started. I have a mixture of green,green, and a little more green. Will start with a spoon on the lead to get the most depth I can. Don't have many spoons but monkey puke will be the choice here. I have a white e-chip with green dots, NBK mountain dew SD, white crush/pearl glow SD with some mixture of green flies on all. For the last rod I haven't decided between a j-plug, spoon or another FF. For the area I plan to run north a few miles somewhere between 150-200ft then work my way east and see what happens. Any thoughts or recommendations on the initial game plan would be appreciated. The marine report for Oswego looks good for Friday and Saturday but the thunderstorms have me a little worried. I will have to wait and make it a last min decision but keeping my fingers crossed. Sent from my SM-G950U using Lake Ontario United mobile app
  15. Thanks for the info guys. Now just hoping for some good weather. Sent from my SM-G950U using Lake Ontario United mobile app
  16. I have been coming up to the lake every year for a while now and have fished on a mixture of charters and with friends. I have finally picked up a boat of my own an 18' starcraft. I plan to run 4 maybe 5 rods 2 DR, 2 Dipsey, and a lead core down the shoot if I can get one in time. The trip plan is to launch out of Oswego or possibly mexico depending on reports. With the boat being on the smaller side I don't want to get very far from shore until there is some more experience under my belt on the big lake. I don't have a set trip date trying to let the weather decide that for me. Available dates would start next Friday and run thru the end of the month. I guess my question would be should I find fish in 200ft of water or less in that general time line? The reports I am seeing are talking about 400-500 and I am hoping I don't have to go quite that far. Thanks Sent from my SM-G950U using Lake Ontario United mobile app
  17. I would be interested in the flies. Sorry the app wont let me pm says it is unsupported for some reason. My cell is 570-604-3990 If texting is easier. Thanks Dave Sent from my SM-G950U using Lake Ontario United mobile app
  18. I'm interested if something doesn't work out Sent from my SM-G950U using Lake Ontario United mobile app
  19. Great thank you. I found some but wasn't sure if it would handle the job. Sent from my SM-G950U using Lake Ontario United mobile app
  20. I had a question. Is 18lb lead core strong enough to run for salmon? The lb test is what I am speaking of. Thanks for any help. Sent from my SM-G950U using Lake Ontario United mobile app
  21. Normally fish for all three. Flatheads like to use live sunfish or rock bass. Chanel cats only use cut bait. For bullhead a good old night crawler.
  22. Check out the navionics app for you phone. I don't remember what I paid bit I think around 10-15. Easy to use. You can click on a spot and it will give you the latitude and longitude.
  23. I have fished lake o for the last 12 years or so on a mix of charters and with friends. This will be the first year on my own boat. Picked up an older 18' starcraft. She needs a little work but should be ready for spring. Can't wait to get out there.
  24. Ton of episodes on youtube. I think season 3,4,5,6 about a dozen episodes per season. Just what I needed at the end of winter.
  25. BS the carbs on my trimmer were shot from ethenol. Found a new replacement carb on ebay for $12. I started just replacing carb instead of rebuild.
×
×
  • Create New...