Zinger11

If I was fiberglass it I would never get the gel coat non slip Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Can this be applied to a fiberglass floor and if so what's the best adhesive thanks Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

I also like to use fish USA but sometimes they just don't have the patterns I'm looking for. If I was smart I would have taken a picture of the package that the ten spoons came in because there was no way it was big enough to fit any flashers Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

A few months ago I was reading a post from people who had gotten ripped off from Coldwater tackle and I didn't pay much attention because I have never had a problem. Well I ordered a bunch of spoons and flashers .I received the spoons but no flashers even though the packing slip said they had sent them after going around and around with them for the last month I guess I'm out 45 bucks. Lesson learned Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

X2 Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

I have a 25ft Wellcraft with a 5.7 with a Honda 9.9. Last spring I blew my motor 5.7 and thankfully got back with the Honda no problem topping out at 5mph Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Fishing the thermocline Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Thanks Bob for the help my static timing is 10 degrees bdc center and my original motor was 260 hp I replaced it with a 330 hp with a brand new carburetor which is opening up all the way Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

When I bought the boat it had a 16x16 on it and i was given a 15x15 that I changed so i never ran the 16. Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

I have a 25 footer just put a new 5.7 and I can't get the rpms over 3000 underway but in neutral 3,000 RPMs is like a throttle Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Will going from a 15x15 to a 16x16 increase my rpms at wot And if so how much Thanks Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Two chirp transducers and a Fish Hawk never had a problem Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

When they replaced your bearing did they check your engine alignment ? It's easy to do and shoud be done every 3 years. If it comes out of alignment you could lose your gimbal bearing or even worse your coupling Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

I have a 25' wellcraft with a honda 9.9 kicker that pushes my boat at 5.5 mph full throttle . My buddy has a 17' aluminum boat that has the same exact honda 9.9 and it pushes his boat at 5.5 mph full throttle and my boat weighs almost 3 times more. It's all about hull speed and I wonder if you go with a 15hp the only thing you'll get out of it is adding more weight to your boat Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Jasper crate motor Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Oil I'm installing a new 5.7 mercruriser in my boat and someone recommended I use Shell Rotella 15w40 I know its for diesel engines and was wondering if anyone else uses it Thanks

I have an i/o so with a 3 way valve once I was on the fishing grounds I would have to shut my 5.7 off , lift my dog house switch the valve to the kicker, pump the ball and start the kicker and pray the boat doesn't get blown around while this all happens ? Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

I had replaced the bulb it was a cheap way out but that didn't help Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

9.9 kicker I have a Honda 9.9 kicker that I run on my 25' wellcraft that has a 5.7. I ran the fuel line to the Honda from the fuel separator and I have a hard time getting fuel on initial startup once I get it running it will go all day but when I shut it off I lose all the pressure no matter how many time I pump the ball and have to start up the big motor to get fuel back to the separator. Any thoughts Thanks

O yea the chart plotter sucks on the striker sv but i have another one I use Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

I have the Garmin striker sv and couldn't be happier saw fish out were the planner boards worked out well even in deeper water Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

I went out of the salmon river wasn't that bad Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app

Heading to Henderson Harbor tomorrow for the week anybody got any updates or water conditions Sent from my SAMSUNG-SM-G930A using Lake Ontario United mobile app