buckblaster

Raymarine EV-100 Sent from my SM-S767VL using Lake Ontario United mobile app

Are they sold? Sent from my iPad using Lake Ontario United mobile app

Well I can tell ya I've drug the bottom of 150fow line in front of the plant for 3 hours with bells and spin n glows. 1.6 to 1.9 mph via fish hawk. Nuffin! 4 rigs down. No fish in this lake Sent from my SM-S767VL using Lake Ontario United mobile app

By the dunes? Or any luck by the plant? Sent from my SM-S767VL using Lake Ontario United mobile app

Looking for a hand with the Lakers in Mexico area. FOW and area. Thx in advance Sent from my SM-S767VL using Lake Ontario United mobile app

Ok, perfect. Thank you very much Sent from my SM-S767VL using Lake Ontario United mobile app

Also I don't use sonar on plane. I Usually just use GPS function on plane Sent from my SM-S767VL using Lake Ontario United mobile app

The inside one is 50/200 the outside one is 83/200. I thought they all ran both beams at the same time? Is that enough khz separation? Sent from my SM-S767VL using Lake Ontario United mobile app

Here's what I ended up doing. Ducers are 18" apart. Hope being staggered in height won't affect their performance. Water test is next. I will update after. Sent from my SM-S767VL using Lake Ontario United mobile app

Great idea! Thank you very much Sent from my SM-S767VL using Lake Ontario United mobile app

HST-DFSBL not HTS ITS PAIRED WITH LOWRANCE HDS7 GEN2 Sent from my SM-S767VL using Lake Ontario United mobile app

I called lowrance and had this discussion with them. I primarily troll for salmon on lake O. Gave them my depth and speeds and target fish species, they recommended the HTS-DFSBL 50/200kHz transducer. I'm trying to figure out where to install it with my other ducers so I don't get interference. See the next post I just started " Transducer installation location advice ". Good luck, I will be following. Sent from my SM-S767VL using Lake Ontario United mobile app

All - I am looking for solid advice on installing a new lowrance 50/200 kHz xducer on my boat. I have fish hawk ducer (70kHz) on left and hummingbird bird (83/200kHz) ducer on right. Very limited real estate on the transom. I know it is possible to do shoot thru hull, but not sure on the quality I will get? I have read the directions and understand how to install it, just no clear advice on how far apart they need to be and if they all need to be level with each other. Thanks in advance Sent from my SM-S767VL using Lake Ontario United mobile app

I've got 2 Sent from my SM-S767VL using Lake Ontario United mobile app

Same here. Never again Sent from my SM-S767VL using Lake Ontario United mobile app