Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

NETBOY101

Members
  • Content Count

    12
  • Joined

  • Last visited

Community Reputation

3 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Sorry about that fisherdude is right the magnet access an electric current break so your downrigger shuts off
  2. http://www.walkerdownriggers.com/why.buy.walker.htm Sent from my SM-A102U using Lake Ontario United mobile app
  3. I put mine just behind the tail then I put a tooth pic in the small hole to keep the hook set Sent from my SM-A102U using Lake Ontario United mobile app
  4. If you have high gunnels this might help you https://www.amazon.com/Scotty-Sure-Downrigger-Snubber-60-Inch/dp/B07SS978MJ/ref=mp_s_a_1_8?dchild=1&keywords=downrigger+snubber&qid=1597586481&sprefix=downrigger+&sr=8-8 Sent from my SM-A102U using Lake Ontario United mobile app
  5. Around the same a 70hp is 253lb
  6. On boats less than 20 feet in length with no capacity plate, use the following rule of thumb to calculate the number of persons (weighing 150 pounds each, on average) the boat can carry safely in good weather conditions. Number of people = (boat length (ft.) × boat width (ft.))÷15 For example, for a boat 18 feet long by 6 feet wide, the number of persons is 18 times 6 (or 108) divided by 15, which equals seven 150-pound persons (or a total person weight of 7 × 150, or 1050 pounds). Sent from my SM-A102U using Lake Ontario United mobile app
  7. My otter boards do just fine I have to order another keel It does drag a little with just one but seen other boats that have two keels they run better Sent from my SM-A102U using Lake Ontario United mobile app
  8. That's what I do I use a small carabiner that hooks to the planner board line then tied off on my gunnel. Short arm curse Sent from my SM-A102U using Lake Ontario United mobile app
  9. Mine turned off or went to gain but know all is good
  10. 1991 80hp merc , spark plug is ignited it produces electricity, a regular spark plug has a frequency between 60 and 120 hertz the Fishhawk runs on 70 hurts and your fish finders run from 120 hertz and up depending on your model the resistor plugs have an insulator that insulates those hurts so you don't have interference Sent from my SM-A102U using Lake Ontario United mobile app
  11. I had problems with mine and I fixed it I have an outboard motor and what the problem happened to be was the spark plugs believe it or not, the spark plugs were creating an electromagnetic field interfering with the signal of the Fish Hawk so I ordered resistor spark plugs and it fix the problem Sent from my SM-A102U using Lake Ontario United mobile app
  12. I would consider using 20 or 25lb mono because of the sand flees 15 lb you will be cleaning your lines alot more and false releases can happen only in the summer Sent from my SM-A102U using Lake Ontario United mobile app
×
×
  • Create New...