emtystringer

check your pm

CHECK YOUR PM

i have 4 rods that have never been used but tags were removed. 3 are 9 ft and one 8.6ft they are 3 medium to heavey and 1 medium light action for $50 plus shipping

CANNON SPEED AND TEMP UNIT,$300 PLUS SHIPPING, includes monitor,probe and about 375 ft of coated cable,this outfit was only used one time on LO.this is a great buy considering the cost of a probe

i have a very expensive Lowrance fishfinder that has a problem and needs repair.the company doesn't make repaires after a few years. Does any body know someone that could repair these units. It doesn't seem right to just to through a $1800 unit out after a few years so you should consider this when buying Lowrance products.

CANNON SPEED AND TEMP UNIT,$300 PLUS $25 SHIPPING, includes monitor,probe and about 375 ft of coated cable,this outfit was only used one time on LO.

question,why can't you tie your backing or leader dierectly to a small loop in that hay wire trist and don't use any swivel?

sent you a pm

sent you a pm

i want to thank you for your info, i was begining to think my question was stupid but i really tried to think of every thing before i use it for the first time

i plan on useing 500 ft of copper off an otter boat, my question is does it slide out easy with out getting stuck because of the weight and what kind of release will slide out and hold this much copper?

SHADE, a cheap way to help your problem is purchase a piece of 1 inch alluminum conduit cut it in half insert your rigger ends and you will have 6 foot booms off the side of your boat for a bigger spread ,thats what i did and no problems.

say RAY , I been giving thought to those keel sinkers, question is do you use them on a long rod so to be abel to have a long leader and what depth is your guess the 1.24 and 2.24 gets you?

thanks for your input RAY i will look into that keel sinker because my boat is smallwith no room

my question is does it hurt your lead core line if you atach a release to it fishing with a planer board or do you have to let the entire full colors out and then fasten to the release?

HEY BILLY V i do appreciate you for that information don't get me wrong and please continue to supply that information .But what i was getting at that there are cheaper ways than sending out your downriggers. as CBISH stated the item only cost him $14.00 and it doesn't take rocket science to connect the ends.the cost is really about $30.00 UPS AND i don't have a service center close to my home .

Thats just real great .I have 2 mag 20 and i will run down and mail them right out for $60.00 and every thing is all right. Why can't they just send you the new cords so you don't have to pay that unnessary freight.

i have the nautic path chip and it covers all the coastal waters in the U.S.A. including the Great Lakes, I also have a Narvonic Gold chip that shows the same detail but just a smaller area and you would need several chips to cover the area the nautic path covers. i would go for the nautic path.

capt ace, are you running your probe with out changes. you just run your dubro release above the probe and weave your cable through the original connection on thje probe the way cannon meant it to be.does this connection feel safe to you.it looks sone what ,like you could lose the probe to me i don't know that is why i am asking.

thanks for the input ,but i have another question. i saw jeff lantiegne and maniac's set up but i like the blacks release and can't seem to figure out how i can add it to there set up, any help.

I'm looking into buying the Cannon speed and temp but really want to know all its flaws an how you compare it with the Depth Raider or Subtroll or are they compareable .I don't see any body jumping up and down over cannon units ,i would like to know why.

Wanted, Gimbal bracket that fits one of the following, GlobalMap 3000, GlobalMap 4000M, GlobalMap 5000C, GlobalMap 6000C, GlobalMap 7000C, LCX-104C, LCX-15CI, LCX-15CT, LCX-15MT, LCX-16CI, LCX-18C, LCX-19C

Ray,you know education is a wonderful thing . In school they forget that there is a thing called common sense, there all book smart.

i don't hear to much talk about cannon's snt,is there any neg or positive feed back.

i have a friend who has Scotty Downriggers, he wants to go with braided downrigger cable. he wants to know how the bead on the cable activates the short stop. does the bead trip something or what?