nysrx01

The panther will lift your motor easily out of the water. One thing for sure always use the safety cable they give you. My worry was having the plastic break while motoring back in with the troller up and losing the motor to the bottom. I think they also make different height lifts too. I had the 10 inch lift one. amazon has some returned ones for around $250.

Sent you PM.

Removed from my bigger boat and Down sizing to a smaller 14 ft and decided not to instal it on the 14 ft. $900 TYD plus any payment fees. Retails $1250 plus tax.

6 inch tall track mount swivel bases. 2 are slightly used. 1 is new.

TTT

Lowrance NMEA starter kit. Brand new still in original box/packaging. $65 TYD.

The one thing I do not like about the big John auto stops if you stop the ball below water level which is where I like stop it so it doesn’t swing and bounce the rigger boom. But you cannot just hit up again after it stops to raise the ball higher to get to the release. . You have to drop the ball first to make it come back up again that’s kind of a pain in the neck. Or crank them up by hand. Scotty’s auto stops work great and then you can just flip it back up to keep coming afterwards. Plus I like the manual clutch handle for descending the ball. Magnum Metals are nice but pricey. All depends what you want to spend. You can’t go wrong with the Scotty’s set up with braid for the price. Amazon has the Scotty 1106b for just under $600 each.

3 flashers and 2 large Dipsy divers $30 plus shipping. Text 518-588-8164 thanks

It’s marked sold

Price reduction $200 plus shipping.

Sent PM

The one you have with the HDS 10 is either a LSS1 or LSS2. LSS1 works with the basic structurescan module and the LSS2works with the HD structure scan module. They only read down image and side image you still need a 2d transducer.if the transducer with your 10 is a shorter than your 3D ducer then it’s a LSS1. The LSS2 was the same length as the 3D ducer. Even with the 3D you will need a separate 2d transducer as that also only reads down image and side image too. Like I stated before there should be a silver tag with the transducer ID near the plug end. Text me at (518) 588-8164 if you have any other questions and I can send pics of the different types.

Lowrance has what they call a Live sight transducer that works with all HDS’s. The Active Target Live Sonar only works with HDS Carbon and HDS Lives. The AI 3 in 1 works with HDS Carbon and HDS Live. But the Carbons have to have the latest software update for the AI 3 in 1 to work other wise you need to use the Total scan transducer which works with the HDS Gen 3 too. There is a tag right by the connector that identifies what the transducer is.

You Might want to mention what generation the HDS is. Plus the transducer you show in the picture is not a live scan transducer.

Yes. Sent you a PM.