VooDoo

I have 3 boat seat pedestals with bases. Bases measure 9" across with 1 3/4" holes. 2 pedestals are approx. 14" tall, and one is approx. 13". Compatible with most swivels and seat bolt patterns. $100 plus shipping. Sent from my SM-G930V using Lake Ontario United mobile app

It did work great the one time I used it. My sausage stuffer only holds 5 lbs so I just mix up 5 lbs at a time. Not as lengthy a process. Sent from my SM-G930V using Lake Ontario United mobile app

Cabelas meat mixer. Used 1 time. Clean and in excellent condition. Will mix 20 lbs of meat. I just dont mix up large batches of ground meat, so dont need this. Retail is $149. Sell this for $100 shipped to your door Sent from my SM-G930V using Lake Ontario United mobile app

12 Sent from my SM-G930V using Lake Ontario United mobile app

Says up to 2,300 ft of freshwater. Sent from my SM-G930V using Lake Ontario United mobile app

I used it a lot on Lake O. and never had any problems. The frequencies can be selected. 77 hz was better for deep water. Finally I'd the ducer. It is a 40 Sent from my SM-G930V using Lake Ontario United mobile app

Not on the box or in the manual. Im pretty sure it listed that one in the settings when I restored factory defaults last night. Sent from my SM-G930V using Lake Ontario United mobile app

I'm in WV, but will ship for that price. Can't find a part # on transducer but think its a Gt-40 tm. 2D, downscan and sidescan. Sent from my SM-G930V using Lake Ontario United mobile app

Comes with everything shown in the pics Sent from my SM-G930V using Lake Ontario United mobile app

Bought new 2 yrs. ago. In good working condition when it was removed in Nov. Going larger to a Simrad that will interface with my xi5 trolling motor. Includes everything that came new in the box. $300 Shipped to your door. Sent from my SM-G930V using Lake Ontario United mobile app

Next is the rear deck and console. Sent from my SM-G930V using Lake Ontario United mobile app

Floor and drains are in. Just have to silicone the seams and cracks Sent from my SM-G930V using Lake Ontario United mobile app

Final coat on deck. Has sharkskin non slip additive added into the epoxy. Sent from my SM-G930V using Lake Ontario United mobile app

Also have to figure out a drain system for the floor where the oil reservoir and batteries go under the rear deck. Also adding 3/16" aluminum to the outside of the transom to beef it up a little. Overall the transom is pretty solid. Just doing what i can to beef it up a little. Sent from my SM-G930V using Lake Ontario United mobile app

Yeah, gonna try to seal it. A little undecided on what to use for caulk. Would like to have something I could paint over with the epoxy. Have a big tube of 5200 but I dont think its paintable. Am also condidering just using 40 yr. Paintable Dap with silicone. It would remain flexible and about 3 coats of epoxy over it would seal it. I'm going to put at least 3 and maybe 4 drains that will flow directly into the v part of the hull and run directly into the bilge. Sent from my SM-G930V using Lake Ontario United mobile app

Floor cut out and underside and edges sealed with 2 coats of epoxy Sent from my SM-G930V using Lake Ontario United mobile app

All foam out. Starboard side poured with new foam. Decided to pour and work down high spots. Will then seal foam with epoxy. Didnt want to drill holes in new floor. Trying to stay at least 1/4" below floor with the foam so it can breathe as well as letting the floor be able to dry. Sent from my SM-G930V using Lake Ontario United mobile app

I bought new gas lines. Livewell is solid plastic. Drain molded in. Not really anything to seal on it. I'm not doing the front of the boat at this time. Floor is solid up front. Probably do it in a year or two. The foam that I'm replacing had some areas that were completely saturated. Mainly under the rear deck. The rest of the foam had the bottom soaked but not completely saturated. Went ahead and removed it Sent from my SM-G930V using Lake Ontario United mobile app