landingzone

Bassin Bob, just a reminder.  Be careful not to equate where you see the weights on the fishfinder with their actual depth.  The fishfinder is measuring from the transducer to the weight ie. at the angle of the blowback.  The only time the depth of the ball and the fishfinder reading are the same is with no blowback.. For example, it would not be unusual for the fishfinder to show 120 ft and the weight only be down 100 ft., at trolling speed.  Of course the difference varies with boat speed, depth being fished, and size of the weight.

Nice video!!


Sent from my iPhone using Lake Ontario United

You have a PM.


Sent from my iPhone using Lake Ontario United

600' spool of copper

New 600' spool of 45# copper.  $35 shipped,

PM me if interested.

called John and he said 303 Fabric Guard,

The fabric of my Sunbrella top appears to be in good condition, but it leaks.  What has product anyone used with success to solve this problem?

Thanks, Dick

Our Legislative VP says that neither yearling buck protection/antler restrictions nor any new crossbow provisions made it through in the budget that was just passed.

The above is the response to a question I asked the NYSCC.


Sent from my iPhone using Lake Ontario United

2 hours ago, mudflat said:

 

In NY and Pa the widest load you can trailer legally without a permit is 8'6".  With a permit you are restricted to daylight hours and no weekends.

In NY, with a permit, there is a special provision (SHN 09-03) which allows weekend travel for boats up 10' width. https://www.dot.ny.gov/nypermits/repository/SHN09-03.pdf

You have a PM.

What kind of boat is it from?

Not cheap!  A quick check of my records showed EV200 AP was about $2500 and the Sea Star hydraulic steering system was about $1000, then install costs.  That was in 2015.  Hank (L&M) did the install for me (nice job).  He probably could give you specifics for you application.

Something to consider....  Under most circumstances, you will be trolling with one engine.  If your boat is like mine, there is power steering assist on only one engine.  To keep engine hrs. similar on both engines, you will likely troll about half of the time on each engine.  This means that when using the non power assist engine to troll, you won't have power assist (unless you leave the other engine running).  Without power assist, steering is possible but stiff.  If using an AP in this application, it could be a heavy load for the AP.  Converting to hydraulic steering eliminates these issues.

What are the specifics of your 27'?  Single engine or twins?  I have a 27' with twin I/O's and I converted mine to hydraulic steering and then used a Raymarine EV200 autopilot.  Works well.

THE PROPELLER WORKS
53 Leicester st
Cananadaigua NY 14424
(585) 394-1860
They have helped me a couple times. I believe I sent them pizza once I was so satisfied and I'm a cheap skate.

I'm also interested in getting a 7mm-08.  Would like to keep the cost down but function and reliability are most important.  Have heard good things about Ruger.  Opinions? Other suggestions?

Gator,

Have you hinge cut the ash this time of year before?  If so, how did it work out?  Do they leaf out in the spring?  How long do they last during the year?

potsie225 you have a PM

Mitchell 300's, 3 for $25 shipped

Just cleaning out some old stuff.  These all turn, but the bails are a little stiff, etc.  Would need to be cleaned up and repaired as needed.  Sold as is.  If anyone is interested, I'll sell all three plus the spare spool for $25 shipped.

PM me if interested.

ttt

Nicely done, Lou!

new price

ttt

315angler, you have a PM.

Allan, you have a PM.