lrg355

Just remember, the limit is 3

Sent from my SM-G920V using Lake Ontario United mobile app

Brady's Lake-  Been there many times as a kid.  Located in the Poconos off  Rt 940 near Blakeslee, Pa.  Was origionally a Ice pond.  Had a very long  terrible dirt road to get in there with my fathers 41 Ford pickup carrying a homemade wooden rowboat in the back. I guess I am an oldtimer now.

Here is why I really love Obama And Hillary, the cold hard facts. I am self employed and before Obamacare had paid about $300/month for a healthcare policy that fit my needs perfectly. Soon after my policy was deleted and I was forced Into an ObamaCare policy. Its cost increased steadily. I never received my $2500 reduction and I never was able to keep my Doctor as the Liar In Chief promised. I have just recieved a notice that my cost starting Jan 1 will be $981 per month. I do not qualify any subsidy because I make just over the limit. However, I am eternially grateful that I have pregnancy coverage and drug and alcohol abuse coverage which I do not need. Lest I forget Mental problem coverage also. Since I am a 63 year old male, I am so grateful to the Democrats for my pregnancy coverage.

I wonder if Obama is going to pardon Clinton for NOT committing any crimes to insure no future prosecutions. That will be interesting to see.

Sent from my SM-G920V using Lake Ontario United mobile app

A friend of mine had a 2001 40 hp 4 stroke. 3 cylinder. 3 carbs. Was a Yammy powerhead. Carb problems were constant. Finally had to get rid of it.

Sent from my SM-G920V using Lake Ontario United mobile app

I know low HP Mercury's were made by Yamaha in the late 90's and early 2000's. I believe they are not anymore.

Sent from my SM-G920V using Lake Ontario United mobile app

I put a Yamaha F70LA on my Sea Nymph GLS 175 about two years ago. It weighs 257 lbs. Is the lightest engine in that range, 2 or 4 stroke. Running gauges from my Lowrance HDS touch. Boat previously had a 115 Johnson. It was a rocket but just got tired of the smoke, hard starting and fuel consumption. The Yammy runs all day on fumes. Fuel consumption according to the Lowrance is 9-10 mpg at best cruise about 4000 rpm. Probably get a about 20 mpg trolling. Also hooked into the troll control with a switch. Can go up or down in 50 rpm increments from 600 to

0 1200 rpm. No more carburetors for me. EFI all the way. Touch the key and it runs.

Sent from my SM-G920V using Lake Ontario United mobile app

Fished this morn 90-120 ft out from catfish to high rocks till 11am. 2 for 3 biggest 27 lbs

No winners yet

Sent from my SM-G920V using Lake Ontario United mobile app

Quite east of Oswego no weight attached. Broken cable below. Long rigger cable attached. Must name what was different about rigger cable clip. Not in photo

Sent from my SM-G920V using Lake Ontario United mobile app

Picture of retrieved probe

Sent from my SM-G920V using Lake Ontario United mobile app

Hooked this probe while dragging bottom. If you can identify location and distinguishing characteristic about clip to cable, you can have it back.

Sent from my SM-G920V using Lake Ontario United mobile app

Read that a spray or 1 part water 1 part vinegar and 1 part dawn dish liquid works. Tried it on the boat and it works for a short while. Smells terrible but at least it is non toxic

Sent from my SM-G920V using Lake Ontario United mobile app

Velvet drive Trans are used on inboard drives only. I have one with a 300hp Mercruiser 5.7 inboard on a 27 Sportcraft. Very robust and trouble free .

Sent from my SM-G920V using Lake Ontario United mobile app

You would be much better off launching at the State ramp on the Little Salmom River. (Mexico). The state ramp on the Salmon River called Pine Grove is not very good (dirt), although it would be OK for a 18 ft alum. Price is the same at both, pay the machine.

If you plan to interface to your motor or other devices and possibly get the Lowrance autopilot in the future, the HDS gen2 or 3 is the best choice. I have mine displaying all engine functions on the screen and plan to soon get autopilot and hydraulic steering. Need a later model outboard that is nema 2000 compatible to do this. Really nice.

Sent from my SM-G920V using Lake Ontario United mobile app

Also any Honda 9.9 without a serial # trying to be sold or serviced should get attention by all members.

If you know the serial # of the Honda, you should post it and all members can keep an eye out.  It may be noticed somewhere.

I have two female rod end bearings with a piece of stainless threaded rod between. Inexpensive and can make any necessary length with some final adjustment. McMaster Carr has them. Can do it for

about $30

Always seems to be bullhead fisherman where Little Sandy Creek enters Sandy Pond. This is just a few hundred yards in from the left turn off RT 3 near the Church Mouse. I have never fished here but it seems there are always night fisherman there in late April.

I have 4 of them I bought used about 12 years ago.  $900  for all from someone that thought they were too complicated.  Run well.  Had one display go last year.    I like the fact that I can progam the depth and let it run down while I am doing something else.  They also have the timed up and down cycling within a set distance like 10 ft or so.  use it sometimes but never really noticed a improvement in releases.   Retrieve is auto stop but it is not a short stop that detects disconnect of cable from water, it is an actual count up of pulley rotation.

Looks like in front of the removed docks at the Mexico launch?

Sent from my SM-G920V using Lake Ontario United mobile app

Any info on the Mexico Launch lately?

Meant to say "hall effect" device

Sent from my SM-G920V using Lake Ontario United mobile app

Pertronix kit has a small module that goes in the distributor and a pickup for the fall effect device. It all fits in the original distributor.

Sent from my SM-G920V using Lake Ontario United mobile app